Miniscrews Primary Stability

Not Applicable

• Conditions: Orthodontic Appliance Complication
• Interventions: Device: Orthodontic miniscrew insertion

• Registration Number: NCT03696511
• Lead Sponsor: University of Genova

Brief Summary

Orthodontic Miniscrew primary stability is essential for success and long term results.

The aim of the present study is to evaluate Bone Properties and Torque insertion values and how they could be related to primary stability and success rate of miniscrew.

Detailed Description

Orthodontic miniscrews are intraoral anchorage devices designed to support biomechanics during orthodontic tooth movement. Also known as miniscrews, mini-implants, microscrews, or temporary anchorage devices, they are made of a head, a neck, and a threaded shank. The head may show different designs (bracket-like, rounded with slot, etc.) the threaded shank is generally cylindrical, tapered or a combination of the two, and may be self-tapping (i.e. requiring a pre-drilled pilot hole) and/or self-drilling (not requiring a pilot hole). Because of their small diameter, they may be implanted in a wide variety of anatomic sites, such as the alveolar interradicular spaces or the palatal cortical bone, in order to attend to treatment anchorage needs. The loading protocol for miniscrews loading can be as immediate as delayed; in the beginning in literature was indicated a non-specific period of healing and osseointegration before a screw inserted in the mandible could be loaded; the importance of a healing period was derived by several studies on Branemark protocol on implants. Further experimental studies on orthodontic load were not able to demonstrate loaded implant loosening, even when loads were applied immediately, so that an immediate loading protocol for orthodontic miniscrews appeared as reasonable. Costa and Melsen studied the tissue reaction around the immediately loaded screws in an animal model and suggested the use of immediately loaded screws as an intra-oral extra-dental anchorage. Histomorphometric analyses have shown that the immediate loading of miniscrew implants may help to activate bone remodeling and increase the mineral contents at the loaded region. Compared to traditional endosseous implants, orthodontic miniscrews have relatively high failure rates, varying from 16.4% to 39% ; according to recent reviews, the average failure rate is believed to be less than 20%. Many factors have been proposed to be associated to success rate; among these age, gender, jaw (maxilla or mandible), placement site, tissue mobility (firm or movable tissue), inflammation, distance to the root, insertion torque, loading time, type, length, and diameter of the miniscrew. Recently, an experimental study on primary stability found that bone properties are more important than the screw geometry in establishing primary mechanical retention. Thus the aim of this study is to deeply analyze the bone role related to the success of miniscrews analyzing both insertion/removal torque values, both bone characteristics by the mean of x-rays.

Basic Information
|
Recruitment & Eligibility
|
Study & Design
|
Trial Locations

Study Timeline

• Study First Submitted: 2018-07-18
• Study Start: 2018-09-29
• Status Verified: 2018-10
• Study First Submitted QC: 2018-10-03
• Study First Posted: 2018-10-04
• Last Update Submitted: 2019-10-04
• Last Update Posted: 2019-10-07
• Primary Completion: 2020-06-30
• Study Completion: 2020-12-30

Recruitment & Eligibility

• Status: UNKNOWN
• Sex: All
• Target Recruitment: 30

Inclusion Criteria

• patient who need ortho treatment with miniscrew
• permanent dentition

Read More

Exclusion Criteria

• bone pathologies
• systemic disease

Read More

Study & Design

• Study Type: INTERVENTIONAL
• Study Design: PARALLEL

Arm && Interventions

Group	Intervention	Description
group 1:maxillary insertion	Orthodontic miniscrew insertion	Orthodontic miniscrew insertion; maxillary insertion. buccal
group 2: mandible insertion	Orthodontic miniscrew insertion	Orthodontic miniscrew insertion; mandible insertion.
group 3: palatal insertion	Orthodontic miniscrew insertion	Orthodontic miniscrew insertion; palatal insertion

Primary Outcome Measures

Name	Time	Method
Success	From the moment the screw will be placed, measuring maximum insertion torque, through study completion, when the screws will be removed, measuring removal torque. An average duration of screw of 10-12 months is expected.	How many screws don't fail. Success if the screw remain stable until the end of biomechanics applied.

Secondary Outcome Measures

Name	Time	Method
MIT	The date when, for each patient, the miniscrew will be inserted. Registered as the insertion date (day). Up to 12 months from orthodontic therapy beginning. The event is determined from date of randomization list creation until the day of screw insertion	miniscrew maximum insertion torque: The moment when the screw will be placed, the maximum insertion torque will be registered at the insertion time, with a analogical screwdriver, measured in Ncm
MRT	The date when, for each patient,the miniscrew will be removed.Registered as the removal date (day).Up to 24 months after miniscrew insertion.The event is determined from date of randomization list creation until the day of screw removal, up to 48 months	maximum removal torque. Maximum removal torque will be recorded using an analogical screwdriver at the completion of screw insertion. MRT is a unique value expressed in Ncm measured when the screws will be removed.

Trial Locations

Locations (3)

Orthodontic Departments; 🇮🇹 Brescia, Italy

Orthodontic Department; 🇮🇹 Genova, Italy

Universidad Alfonso X El Sabio (UAX); 🇪🇸 Madrid, Spain