MedPath

Evaluate the PK, Safety, Tolerability of Ferric Maltol at 3 Dosage Levels in Paediatric Subjects With Iron Deficiency

Phase 1
Completed
Conditions
Iron Deficiency, Anaemia in Children
Iron-Deficiency
Interventions
Registration Number
NCT03181451
Lead Sponsor
Shield Therapeutics
Brief Summary

The study has been designed to establish the pharmacokinetics (PK) and iron uptake of Ferric Maltol in children and adolescents aged 10-17 years using two (2) lower dose strengths in comparison to the EU-approved 30mg BID dose in adults with IDA in IBD.

Detailed Description

Phase I, open label, randomized, repeat dose, multicentre, pharmacokinetic study to assess the Safety and Tolerability of Ferric Maltol in 3 different dosages.

36 eligible patients will be randomized in a 1:1:1 ratio to one of the following 3 dosages for 9 days BID and a single dose on Day 10:

* 30mg ferric maltol capsules

* 16.6 mg ferric maltol capsules

* 7.8 mg ferric maltol capsules

Subject participation in the study will consist of 3 stages:

Screening: up to 14 days Treatment period: 10 days treatment period with 2 visits on Day 1 and Day 10 for PK blood sampling. Patients will be randomly allocated to one of the three Ferric Maltol dose groups according to centralized treatment allocation scheme.

Post-treatment Safety Follow-up:3-10 days following completion of the treatment period or premature discontinuation of study medication

Recruitment & Eligibility

Status
COMPLETED
Sex
All
Target Recruitment
37
Inclusion Criteria
  1. Ability to understand the information given in the Independent Ethics Committee (IEC) approved Information Sheet and Consent form. The parent or guardian of the study subject must sign and date the informed consent and authorisation to use protected health information (PHI) in accordance with national and local subject privacy regulations prior to any study mandated procedure. The study participant will be asked to provide their assent to participate in the study using the IEC approved Assent form.
  2. Willing and able to comply with study requirements.
  3. Age ≥10 to ≤17 years at the time of informed consent and throughout duration of the study.
  4. A current diagnosis of iron deficiency (with or without anaemia); iron deficiency defined by ferritin <30 µg/L, or ferritin <50 µg/L with transferrin saturation (TSAT) <20%, as measured by the central laboratory at the Screening visit (subjects with or without anaemia may be enrolled providing Hb is ≥8.5 g/dL as measured at the Screening visit).
  5. Where appropriate, female subjects of childbearing potential must agree to use a reliable method of contraception until study completion and for at least 4 weeks following their final study visit. Reliable contraception is defined as a method which results in a low failure rate, i.e., less than 1% per year when used consistently and correctly, such as implants, injectables, some intrauterine contraceptive devices (IUDs), complete sexual abstinence, a vasectomized partner and oral contraceptive medications.
Exclusion Criteria
  1. Has untreated or untreatable severe malabsorption syndrome e.g., untreated coeliac disease
  2. Has received within 28 days prior to Screening intramuscular or intravenous (IV) injection or administration of depot iron preparation.
  3. Has received oral iron supplementation within 7 days prior to Screening
  4. Has received blood transfusion within 12 weeks prior to Screening or is scheduled to have blood transfusion or donations during the study period.
  5. Has concomitant disease that would significantly compromise iron absorption or absorbed iron utilisation such as swallowing disorders and/or extensive small bowel resection.
  6. Has chronic renal disease (eGFR <30mL/min), as assessed at Screening based on serum creatinine.
  7. Known hypersensitivity or allergy to either the active substance or excipients of Ferric Maltol capsules.
  8. Has a known contraindication for treatment with iron preparations, e.g. haemochromatosis, chronic haemolytic disease, sideroblastic anaemia, thalassemia, or lead intoxication induced anaemia.
  9. Impaired liver function as indicated by alanine aminotransferase (ALT) or aspartate transaminase (AST)>2.0 times upper normal limit as measured at the Screening visit.
  10. Active acute inflammatory disease, including IBD flare or disease exacerbation, which in the opinion of the Investigator, is clinically significant.
  11. Active chronic or acute infectious diseases requiring antibiotic treatment.
  12. Pregnant or breast feeding.
  13. Concomitant medical conditions with extensive active bleeding, other than menstrual cycles; subjects who suffer from menorrhagia may be included at the Investigator's discretion.
  14. Scheduled or expected hospitalisation and/or surgery during the course of the study
  15. Participation in any other interventional clinical study within 28 days prior to Screening.
  16. Cardiovascular, liver, renal, hematologic, psychiatric, neurologic, gastrointestinal, immunologic, endocrine, metabolic, respiratory or central nervous system disease that, in the opinion of the Investigator, may adversely affect the safety of the subject and/or objectives of the study drug or severely limit the lifespan of the subject.
  17. Any other unspecified reason that, in the opinion of the Investigator or the Sponsor make the subject unsuitable for enrolment.

Study & Design

Study Type
INTERVENTIONAL
Study Design
PARALLEL
Arm && Interventions
GroupInterventionDescription
30 mg Ferric MaltolFerric Maltol12 subjects will receive 30 mg Ferric Maltol twice daily for 9 days (Days 1-9) plus a final 30mg dose on the morning of Day 10. PK study Day 1 \& Day 10.
16.6 mg Ferric MaltolFerric Maltol12 subjects will receive 16.6 mg Ferric Maltol twice daily for 9 days (Days 1-9) plus a final 16.6mg dose on the morning of Day 10. PK study Day 1 \& Day 10.
7.8 mg Ferric MaltolFerric Maltol12 subjects will receive 7.8 mg Ferric Maltol twice daily for 9 days (Days 1-9) plus a final 7.8mg dose on the morning of Day 10. PK study Day 1 \& Day 10.
Primary Outcome Measures
NameTimeMethod
Maximum Plasma Concentration [Cmax] of Maltol Glucuronide on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of maltol glucuronide Cmax from PK samples collected on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Time of Maximum Plasma Concentration [Tmax] of Maltol Glucuronide on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of maltol glucuronide Tmax from PK samples collected on Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Half Life [t1/2] of Maltol Glucuronide on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of maltol glucuronide t1/2 from PK samples collected on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Ratio of Maximum Plasma Concentration [Cmax] of Maltol Glucuronide on Day 10/Day 1Day 1 and Day 10, pre-dose and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics of ratio maltol glucuronide Cmax Day 10/Day 10 from PK samples collected on Day 1 and Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Ratio of Area Under The Curve [AUC] of Maltol Glucuronide on Day 10/Day 1Day 1 and Day 10, pre-dose and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics of ratio maltol glucuronide AUC Day 10/Day 10 from PK samples collected on Day 1 and Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Average Serum Concentration [Cave(0-6h)] of Iron on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of iron Cave(0-6h) from PK samples collected on Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Change From Pre-Dose (Ctrough) to Maximum Post-Dose (Cmax) in Serum Iron on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of change in serum iron \[Ctrough to Cmax\] from PK samples collected on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Apparent Systemic Clearance (CL/F) of Maltol Glucuronide on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h

Descriptive statistics and population PK analysis of plasma maltol glucuronide CL/F from PK samples collected on Day 1.

Apparent Systemic Clearance (CL/F) of Iron on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of serum iron CL/F from PK samples collected on Day 10

Apparent Volume of Distribution (V/F) of Iron on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of iron V/F from PK samples collected on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Apparent Volume of Distribution (V/F) of Transferrin Saturation (TSAT) on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of TSAT V/F from PK samples collected on Day 1

Apparent Volume of Distribution (V/F) of Transferrin Saturation (TSAT) on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of TSAT V/F from PK samples collected on Day 10

Ratio Auc(0-6) Maltol Glucuronide Day 10/Day 1Day 1 to Day 10 (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Ratio AUC0-6h measured after last dose of Ferric Maltol on Day 10 vs first dose Day 1.

Serum Iron - RAUC(0-6h) D10/D1Measured after first and last dose of Ferric Maltol on Day 1 & Day 10 (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Serum Iron - RAUC(0-6h) Day 10/Day 1

Transferrin Saturation (%) Day 1, BaselineMeasured after first dose of Ferric Maltol on Day 1 (0h)

Transferrin Saturation (TSAT%) Day 1, baseline

Transferrin Saturation (%) Day 1, Maximum Response (%)Measured after first dose of Ferric Maltol on Day 1 (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Transferrin Saturation (TSAT%) Day 1, maximum response (%)

Transferrin Saturation Day 1, Time to Maximum Response TmaxMeasured after first dose of Ferric Maltol on Day 1. (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Transferrin Saturation (TSAT%) Day 1, time to maximum response Tmax (h). Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Transferrin Saturation (%) Day 10, Maximum Response (%)Measured after last dose of Ferric Maltol on Day 10. (0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Transferrin Saturation (TSAT%) Day 10, maximum response (%). Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Transferrin Saturation Day 10, Time to Maximum Response TmaxMeasured after first dose of Ferric Maltol on Day 10. (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h).

Transferrin Saturation (TSAT%) Day 1, time to maximum response Tmax (h). Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

AUC0-inf Day 1 for Maltol GlucuronideMeasured after first dose of Ferric Maltol on Day 1 (0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

AUC0-inf for Maltol Glucuronide from PK samples collected on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

AUC0-tau Day 10 for Maltol GlucuronideMeasured after last dose of Ferric Maltol on Day 10. (0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

AUC0-tau for Maltol Glucuronide from PK samples collected on Day 10. Area under the plasma concentration versus time curve from time 0 to tau.

Plasma Maltol Glucuronide Cthrough D10/Day1Day 10 (0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Minimum concentration between dose time and dose time+TAU

Maximum Plasma Concentration [Cmax] of Maltol Glucuronide on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of maltol glucuronide Cmax from PK samples collected on Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Area Under The Curve [AUC] of Maltol Glucuronide on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of maltol glucuronide AUC from PK samples collected on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Area Under The Curve [AUC] of Maltol Glucuronide on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of maltol AUC from PK samples collected on Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Average Plasma Concentration [Cave(0-6h)] of Maltol Glucuronide on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of maltol glucuronide Cave(0-6h) from PK samples collected on Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Time of Maximum Plasma Concentration [Tmax] of Maltol Glucuronide on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of maltol glucuronide Tmax from PK samples collected on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Change From Pre-Dose (Ctrough) to Maximum Post-Dose (Cmax) in Serum Iron on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of change in serum iron \[Ctrough to Cmax\] from PK samples collected on Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Pre-dose Adjusted Incremental Area Under the Curve [AUC(0-6h)] of Serum Iron on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of pre-dose adjusted incremental AUC(0-6h) of serum iron from PK samples collected on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Pre-dose Adjusted Incremental Area Under the Curve [AUC(0-6h)] of Serum Iron on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of pre-dose adjusted incremental AUC(0-6h) of serum iron from PK samples collected on Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Pre-dose Adjusted Incremental Area Under the Curve [AUC(0-6h)] of Transferrin Saturation (TSAT) on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of pre-dose adjusted incremental AUC(0-6h) of TSAT from PK samples collected on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Pre-dose Adjusted Incremental Area Under the Curve [AUC(0-6h)] of Transferrin Saturation (TSAT) on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of pre-dose adjusted incremental AUC(0-6h) of TSAT from PK samples collected on Day 10. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Apparent Systemic Clearance (CL/F) of Iron on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of serum iron CL/F from PK samples collected on Day 1

Cthrough for Maltol Glucuronide Day 10Day 10 pre-dose to last (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Change from pre-dose to last PK samples collected on Day 10 for maltol glucuronide.Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Serum Iron Cmax Day 1Day 1 (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Maximum serum concentration of serum iron on Day 1. Each subject had 1 pre-dose (0h) and 2 post dose PK blood sampling between (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h). Subjects were assigned to PK blood sampling schedule. For each individual subject the PK blood sampling schedule was the same on Day 1 and Day 10.

Serum Iron Cmax on Day 10Day 10 (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Maximum serum concentration of serum iron on Day 10.

Apparent Systemic Clearance (CL/F) of Transferrin Saturation (TSAT) on Day 1Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h

Descriptive statistics and population PK analysis of serum TSAT CL/F from PK samples collected on Day 1

Apparent Systemic Clearance (CL/F) of Transferrin Saturation (TSAT) on Day 10Day 10 pre-final dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h)

Descriptive statistics and population PK analysis of serum TSAT CL/F from PK samples collected on Day 10

Apparent Systemic Clearance (CL/F) of Maltol Glucuronide on Day 10Day 1 pre-first dose of Ferric Maltol and up to 6 hours post-dose (0h, 0.5-1h, 1-2h, 2-3h, 3-4h, 4-6h

Descriptive statistics and population PK analysis of plasma maltol glucuronide CL/F from PK samples collected on Day 10.

Secondary Outcome Measures
NameTimeMethod
Ferritin - Change From Baseline to Day 10, PredosePre-dose on Day 1 to Day 10 (0h)

Change calculated as difference in values measured at Day 1, predose (Baseline) and on Day 10, predose.

Transferrin - Change From Baseline to Day 10, PredoseDay 1 pre-dose to Day 10 pre-dose (0h on each day)

Change calculated as difference in values measured at Day 1, predose (Baseline) and on Day 10, predose

Total Iron Binding Capacity - Change From Day 1 to Day 10, PredosePredose from Day 1 to Day 10 (0h on each day)

Change calculated as difference in values measured at Day 1, predose and on Day 10, predose

UIBC - Change From Day 1 to Day 10, PredosePre-dose on Day 1 to Day 10 (0h each day)

Change calculated as difference in values measured at Day 1, predose and on Day 10, predose

Change From Baseline to Day 10 in Haemoglobin ConcentrationScreening and Day 10 (1-4 hours post-dose)

Change calculated as difference in values measured at Screening (Baseline) and on Day 10

Negative and Positive NTBI Tests on Day 1Day 1 (0h)

Negative and Positive Non-Transferrin Bound Iron \[NTBI\] tests on Day 1, predose

Change From Baseline to Day 10 in Absolute Reticulocyte CountChange calculated as difference in values measured at Screening (Baseline) and on Day 10.

Change from Baseline to Day 10 in Absolute Reticulocyte Count collected from PK samples

Treatment-emergent Adverse Events (AEs) Leading to Premature Discontinuation of Study Drug/PK AssessmentsFrom first dose of Ferric Maltol on Day 1 through study completion, on average 4 weeks

Descriptive summary of incidence and causal relationship of treatment-emergent adverse events leading to discontinuation of study drug/PK assessments according to MedDRA preferred term (PT) and system organ class (SOC)

Concomitant MedicationsScreening, Day 1, Day 10 and Post-Study Follow-up visit, on average 4 weeks

Number of subjects with concomitant medications Taken by \>5% of Subjects

Negative and Positive NTBI Tests on Day 10, PredoseDay 10

Negative and Positive Non-Transferrin Bound Iron \[NTBI\] tests on Day 10, predose

Treatment-emergent Serious Adverse Event (TESAE)From first dose of ferric maltol Day 1 through study completions, on average 4 weeks

Descriptive summary of TESAE according to MedDRA preferred Term

Changes in 12-lead ECG Parameters From Screening to Day 10Screening and Day 10 (1-4 hours post-dose)

Overall clinical interpretation of routine ECG parameters from Screening to Day 10

Trial Locations

Locations (7)

Leicester Royal Infirmary

🇬🇧

Leicester, United Kingdom

Nottingham University Hospital

🇬🇧

Nottingham, United Kingdom

Great Ormond Street Hospital

🇬🇧

London, United Kingdom

University College London Hospitals NHS Foundation Trust

🇬🇧

London, United Kingdom

King's College Hospital NHS Foundation Trust

🇬🇧

London, United Kingdom

Royal Manchester Children's Hospital

🇬🇧

Manchester, United Kingdom

Alder Hey Children's NHS Foundation Trust

🇬🇧

Liverpool, United Kingdom

© Copyright 2025. All Rights Reserved by MedPath