Risk Factors of Middle Cerebral Artery Aneurysm.
- Conditions
- Middle Cerebral Artery Aneurysm
- Interventions
- Diagnostic Test: Computed tomography angiography (3D CTA)Diagnostic Test: Transcranial color-coded sonography (TCCS)
- Registration Number
- NCT03493035
- Lead Sponsor
- Medical University of Silesia
- Brief Summary
According to the current view, cerebral aneurysms are acquired degenerative lesions resulting from hemodynamic stress. This single-center case-control study will be carried out at the Department of Neurosurgery, Regional Hospital in Sosnowiec, Medical University of Silesia in Katowice, Poland between June 2015 and June 2017. The aim of the study is to determine morphometric and hemodynamic parameters of aneurysmal and non-aneurysmal middle cerebral artery (MCA) bifurcations and to analyze their relationship with aneurysm formation. A minimum of 75 cases and 75 age- and sex-matched controls will be required for the study. Characteristics of the MCA bifurcations will be determined with computed tomography angiography (CTA) and transcranial color-coded sonography (TCCS). The following variables will be evaluated as potential risk factors for MCA aneurysm formation: radii and cross-sectional area of the main MCA trunk and its branches, tortuosity of MCA trunk, asymmetry ratio, area ratio, the angle between the post-bifurcation branches, the angles between the MCA trunk and the larger and smaller branch, volume flow rate, mean flow velocity and pulsatility index of the MCA. All morphometric and hemodynamic parameters will be assessed as potential risk factors for MCA aneurysm formation.
- Detailed Description
Current evidence suggests that a principal factor involved in formation, enlargement and rupture of cerebral aneurysms are hemodynamic forces acting at arterial bifurcation. The objective of this case-control study is to determine morphometric and hemodynamic parameters of aneurysmal and non-aneurysmal MCA bifurcations and to analyze their relationship with aneurysm formation. This single-center case-control study will be carried out at the Department of Neurosurgery, Regional Hospital in Sosnowiec, Medical University of Silesia in Katowice, Poland between June 2015 and June 2017. The study will include patients (cases) with unruptured MCA aneurysm diagnosed on three-dimensional computed tomography angiography (3D CTA). The controls will be patients with no evidence of intracranial pathologies on 3D CTA, referred to establish the etiology of minor symptoms, such as headache or vertigo. A minimum of 75 cases and 75 age- and sex-matched controls will be required for the study.
CTA scans data in DICOM format will be transferred to Mimics Innovation Suite (MIS) platform (Materialise, Leuven, Belgium). Image segmentation and creation of three-dimensional (3D) models will be carried out with Mimics v.17.0 MIS software (Materialise, Leuven, Belgium). The segmentation process will include main trunks of the MCA and the post-bifurcation branches. Trifurcations of the main MCA trunk will be excluded from the morphometric analysis. MCA bifurcations from the aneurysm patients will be divided into two groups: the An group with aneurysmal MCA bifurcations and the non-An group with contralateral non-aneurysmal MCA bifurcations. Also, MCA bifurcations from the controls will be divided into two groups: R-MCA group with bifurcations of the right MCA and the L-MCA group with bifurcations of the left MCA. Morphometric analysis will include the following parameters: radii and cross-sectional area of the main MCA trunk and its branches (for the larger and smaller branch, respectively), tortuosity of MCA trunk, asymmetry ratio, area ratio, the angle between the post-bifurcation branches, the angles between the MCA trunk and the larger and smaller branch. All TCCS examinations will be performed using a Vivid 3 Pro (GE Healthcare, Chicago, Illinois, USA) equipped with a multi-frequency transcranial probe (1.5-3.6 MHz). Angle-corrected mean blood flow velocity, peak systolic velocity and end-diastolic velocity will be measured for both MCAs. Pulsatility index and volume flow rate in each vessel will be calculated as well. The protocol of the study was approved by the Institutional Review Board, and written informed consent will be sought from all the study participants. All morphometric and hemodynamic parameters will be assessed as potential risk factors for MCA aneurysm formation.
Recruitment & Eligibility
- Status
- COMPLETED
- Sex
- All
- Target Recruitment
- 190
Not provided
Not provided
Study & Design
- Study Type
- OBSERVATIONAL
- Study Design
- Not specified
- Arm && Interventions
Group Intervention Description MCA aneurysm group Transcranial color-coded sonography (TCCS) All patients with unruptured MCA aneurysm diagnosed on three-dimensional computed tomography angiography (3D CTA) and transcranial color-coded sonography (TCCS) . MCA aneurysm group Computed tomography angiography (3D CTA) All patients with unruptured MCA aneurysm diagnosed on three-dimensional computed tomography angiography (3D CTA) and transcranial color-coded sonography (TCCS) . non-MCA aneurysm group Computed tomography angiography (3D CTA) All patients with no evidence of intracranial pathologies on 3D CTA and diagnosed on transcranial color-coded sonography (TCCS). non-MCA aneurysm group Transcranial color-coded sonography (TCCS) All patients with no evidence of intracranial pathologies on 3D CTA and diagnosed on transcranial color-coded sonography (TCCS).
- Primary Outcome Measures
Name Time Method Computed tomography angiography (CTA) analysis of the cross-sectional area of the MCA bifurcations. from 16 June 2015 to 15 June 2017 CTA scans in DICOM format will be used to create three-dimensional (3D) models of MCA bifurcation using Mimics Innovation Suite platform (Materialise, Leuven, Belgium). The points including the largest curvature of MCA main trunk and two post-bifurcations branches will be automatically calculated according to the centreline fitted with a computer-aided design (CAD) tool. In these points the cross-sectional area (mm2) of the MCA trunk and its two post-bifurcation branches will be calculated automatically.
Computed tomography angiography (CTA) analysis of the best fit diameter of the MCA bifurcations. from 16 June 2015 to 15 June 2017 CTA scans in DICOM format will be used to create three-dimensional (3D) models of MCA bifurcation using Mimics Innovation Suite platform (Materialise, Leuven, Belgium). The points including the largest curvature of MCA main trunk and two post-bifurcations branches will be automatically calculated according to the centreline fitted with a computer-aided design (CAD) tool. In these points the best fit diameter (mm) of the MCA trunk and its two post-bifurcation branches will be calculated automatically.
Computed tomography angiography (CTA) analysis of the angles between the MCA bifurcations components. from 16 June 2015 to 15 June 2017 CTA scans in DICOM format will be used to create three-dimensional (3D) models of MCA bifurcation using Mimics Innovation Suite platform (Materialise, Leuven, Belgium). The points of the largest curvature of MCA main trunk and two post-bifurcations branches will be calculated according to the centreline fitted automatically with a computer-aided design (CAD) tool. The centrelines and the largest curvature points will be exported to 3-matic v.9.0 MIS software. Three points of the largest curvatures (the main MCA trunk and two post-bifurcations branches) together with the point of the intersection of both centrelines passing through the main trunk MCA and both branches will determine the arms and the apex of the three angles. The following angle values will be calculated automatically: the angle between the post-bifurcation branches (α angle) and the angles between the MCA trunk and the larger and the smaller branches (β and γ angle).
Pulsatility Index (PI) as calculated from transcranial color-coded sonography (TCCS) blood flow velocities (cm/s) from 16 June 2015 to 15 June 2017 The assessment of blood flow velocities in both MCAs will be performed by transcranial color-coded sonography (TCCS) using a Vivid 3 Pro (GE Healthcare, Chicago, Illinois, USA) equipped with a multi-frequency transcranial probe (1.5-3.6 MHz). For both MCAs the following will be automatically measured:
1. mean blood flow velocity (V) \[cm/s\]
2. peak systolic velocity (Vps) \[cm/s\]
3. end-diastolic velocity (Ved) \[cm/s\] The velocity measurements will be used to calculate in each vessel the pulsatility index (PI), calculated using the following formula: PI=(Vps-Ved)/VVolume Flow Rate (VFR) as calculated from transcranial color-coded sonography (TCCS) blood flow velocities (cm/s) from 16 June 2015 to 15 June 2017 The assessment of blood flow velocities in both MCAs will be performed by transcranial color-coded sonography (TCCS) using a Vivid 3 Pro (GE Healthcare, Chicago, Illinois, USA) equipped with a multi-frequency transcranial probe (1.5-3.6 MHz). For both MCAs the following will be automatically measured:
1. mean blood flow velocity (V) \[cm/s\]
2. peak systolic velocity (Vps) \[cm/s\]
3. end-diastolic velocity (Ved) \[cm/s\] The velocity measurements will be used to calculate in each vessel the volume flow rate (VFR) using the following formula: VFR=V\*p, where p - a cross-sectional area of the main MCA trunk, calculated from the morphometric analysis
- Secondary Outcome Measures
Name Time Method
Trial Locations
- Locations (1)
Wojciech Kaspera
🇵🇱Sosnowiec, Smorzykk@gmail.com, Poland