Opsens Optowire for Fractional Flow Reserve - The O2 Pilot Study
试验速览
- 阶段
- 不适用
- 状态
- 已完成
- 入组人数
- 60
- 试验地点
- 2
- 主要终点
- Safety and handling assessment of the Optowire
研究概览
简要总结
The purpose of this study is to assess the usability and safety of the Opsens OptoWire and Optomonitor in measuring fractional flow reserve (FFR) in patients with coronary artery disease who are undergoing a coronary angiogram.
详细描述
Fractional flow reserve (FFR) measurement involves determining the ratio between the maximum achievable blood flow in a diseased coronary artery and the theoretical maximum flow in a normal coronary artery. An FFR of 1.0 is widely accepted as normal. An FFR value lower than 0.75 - 0.80 is generally considered to be associated with myocardial ischemia (MI).
FFR is easily measured during routine coronary angiography by using a pressure wire to calculate the ratio between coronary pressure distal to a coronary artery stenosis and aortic pressure under conditions of maximum myocardial hyperemia. This ratio represents the potential decrease in coronary flow distal to the coronary stenosis.
Over the past decade, FFR measurement has been increasingly used in cardiac catheterization laboratories. It provides a quantitative assessment of the functional severity of a coronary artery stenosis identified during coronary angiography and cardiac catheterization.
Opsens, Inc. has developed a new pressure wire for use in determining FFR in coronary arteries; the OptoWire. The OptoWire is an instrumented guide wire with a fiber optic pressure sensor mounted 3.5 cm proximal to the tip. The Optowire measures blood pressure during diagnostic and/or interventional procedures when used in combination with the OptoMonitor.
The O2 study is a pilot study which aims to provide preliminary experience in human patients with coronary artery disease. The study data will also be used as part of design validation.
研究设计
- 研究类型
- Interventional
- 分配方式
- Na
- 干预模型
- Single Group
- 主要目的
- Diagnostic
- 盲法
- None
入排标准
- 年龄范围
- 18 Years 至 —（Adult, Older Adult）
- 性别
- All
- 接受健康志愿者
- 否
入选标准
- •Patients with
- •Stable angina or,
- •Unstable angina pectoris or,
- •Atypical chest pain or no chest pain but with suspected ischemia
- •At least one moderate lesion in native coronary artery thought to produce ischemia
- •Operator and patient agree for procedures
- •Patient (> 18 years) has signed a written informed consent prior to procedure
排除标准
- •Lesions with angiographic 'haziness' or suspected to contain thrombus
- •Post-coronary artery bypass grafting
- •Total occlusion
- •If use of atherectomy device is indicated
结局指标
主要结局
Safety and handling assessment of the Optowire
时间窗: Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)
1. Safely reach and cross a target lesion; 2. perform an FFR measurement using the Optowire and Optomonitor according to the product user guide; 3. disconnect the proximal connector on the OptoWire during the procedure, placing an interventional device (if necessary), and reconnecting the Optowire proximal connector; 4. safely remove the Optowire from the coronary artery. Dedicated questionnaires will be used for such assessment
次要结局
- Comparison of FFR values measured with Optowire vs. with FFR guide wire used in standard practice(Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr))
研究者
Olivier F. Bertrand
Study Principal Investigator
Laval University