Comparison of Nasal and Forehead Oximetry in Critically Ill Patients at Risk for Decreased Peripheral Perfusion
- Conditions
- HypotensionPressure Ulcer
- Interventions
- Device: Nasal alar oxygen sensor
- Registration Number
- NCT02382133
- Lead Sponsor
- Washington University School of Medicine
- Brief Summary
Continuous pulse oximetry monitoring is the standard of care in critically ill patients in emergency departments, operating rooms and intensive care units. In patients with poor peripheral perfusion (low blood flow) due to peripheral vascular disease, low body temperature, or shock and the use of medications to raise the blood pressure, clinicians have difficulty obtaining an accurate measurement. This study compares the accuracy of forehead oximetry sensors to nasal alar sensors to lab oximetry measures and on the rate of device related pressure ulcers with both.
- Detailed Description
Continuous pulse oximetry monitoring is the standard of care in critically ill patients in emergency departments, operating rooms and intensive care units. In patients with poor peripheral perfusion (low blood flow) due to peripheral vascular disease, low body temperature, or shock and the use of medications to raise the blood pressure, clinicians have difficulty obtaining an accurate measurement. Several studies have demonstrated the utility of forehead sensor measurements under these clinical conditions. Forehead sensor measurement is considered to be a more central measurement than with digit or ear sensors. However the sensor requires a head band for accurate measurement. On a regular basis, the forehead sensor has led to pressure ulcer development at Barnes-Jewish Hospital despite following vendor recommendations for alternating placement every 8 hours from one side of the forehead to the other. An alternate sensor placed on the nose has recently demonstrated rapid detection of induced drops in oxygen saturation. It has also demonstrated correlation with arterial oxygen saturation measured in a clinical laboratory. The oxygen saturation measurement from the nose is also considered a central measurement. However, studies of the nose sensor were conducted in healthy subjects or during anesthesia care over several hours. Therefore, research is needed to examine the accuracy of the nose sensor in the ICU patient population. In addition, due to concerns for sensor related pressure ulcers in patients with decreased perfusion, the sensor needs to be evaluated for extended periods of time.
Recruitment & Eligibility
- Status
- COMPLETED
- Sex
- All
- Target Recruitment
- 43
-
Presence of an existing arterial catheter for blood sampling and one of the following:
-
Difficulty obtaining a consistent signal from a digit or ear sensor or
-
On pressors of at least 0 .10 mcg/kg/min of norepinephrine or
-
Core temperature < or equal to 35 degrees C
- Anatomic impediments (burns, wounds, dressings, etc.) to placement of the sensor on the forehead or nasal alar
- History of known dyshemoglobinemias evidenced by carboxyhemoglobin levels > 10% or methemoglobin level > 2%
- Severe anemia with hemoglobin < 5 g/dL
- Pregnant women
Study & Design
- Study Type
- INTERVENTIONAL
- Study Design
- SINGLE_GROUP
- Arm && Interventions
Group Intervention Description Nasal alar oxygen sensor Nasal alar oxygen sensor Application of a nasal alar oxygen sensor
- Primary Outcome Measures
Name Time Method Accuracy as Indicated by Co-oximetry Measure of Arterial Oxygen Saturation 24 hours accuracy of sensor measure was defined as sensor measurements within 3% of co-oximetry measures
- Secondary Outcome Measures
Name Time Method Device Related Pressure Ulcer 5 days assessment for development of pressure ulcer at forehead sensor, "OxiMaxTM, Nellcor,Covidien" and nasal alar sensor, "Alar One-SenseTM, Xhale Assurance"
Trial Locations
- Locations (1)
Barnes-Jewish Hospital at Washington University
🇺🇸Saint Louis, Missouri, United States