MedPath

Fractional Laser Assisted Delivery of Anesthetics IIIb

Phase 4
Completed
Conditions
Local Anesthesia of the Skin
Interventions
Drug: AHES 25 minutes
Drug: LTC 5 minutes
Drug: AHES 5 minutes
Drug: AHES 15 minutes
Drug: LTC 15 minutes
Drug: LTC 25 minutes
Device: fractional CO2 laser, 50 mJ, 5% density
Registration Number
NCT03279757
Lead Sponsor
Netherlands Institute for Pigment Disorders
Brief Summary

The purpose of this study are to compare the efficacy of two different commercially available local anesthetics on AFXL pretreated skin and to assess the role of the application time in this technique.

Detailed Description

Rationale: In dermatology anesthetics are frequently injected or topically applied to achieve local anesthesia. Injectable anesthetics are effective but uncomfortable during administration, especially for people who are needle phobic. Application of topical anesthesia is painless but time consuming and often only partial aesthesia is achieved due to the barrier function of the stratum corneum. (Manuskiatti, Triwongwaranat et al. 2010) Penetration of local anesthetics could be enhanced by pretreatment of the skin with ablative fractional lasers (AFXL) which locally disrupts the stratum corneum by creating an array of microscopic ablation channels. (Sklar, Burnett et al. 2014) In a previous pilot study, conducted at our institute, we demonstrated that effective anesthesia could be achieved within ten minutes after application of a topical anesthetic on skin pretreated with AFXL at painless settings. (Meesters, Bakker et al. 2015) However, little is still known about the role of the type of anesthetic the type of anesthetic and the application time on the efficacy of the anesthesia.

Objective: The objective of this study is to compare the efficacy of two different commercially available local anesthetics on AFXL pretreated skin, a low concentration articaine solution and a high concentration lidocaine/tetracaine cream. We also aim to compare the efficacy of AFXL assisted topical anesthesia after various different application times.

Study design: Prospective, single blinded, randomized, controlled, within subject, pilot study.

Study population: 15 healthy volunteers ≥18 years, who give written informed consent

Intervention: In each subject, six test regions on subject's back of 1x1 cm will be pretreated with the fractional carbon dioxide (CO2) laser at 2.5 mJ and 15% density and will be randomly allocated to application of (I) articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml 30 solution (AHES) (5 minutes application time), (II) AHES (15 minutes application time), (III) AHES (25 minutes application time), (IV) lidocaine 70 mg/g + tetracaine 70 mg/g cream (LTC) (5 minutes application time, (V) LTC (15 minutes application time), (VI) LTC (25 minutes application time). After 15 minutes a pain stimulus, consisting of a pass with the fractional CO2 laser at 50 mJ and 5% density (scanned area 6x6 mm), will be given at each test region. In addition, a reference pain stimulus with the CO2 laser at the same settings will be given at unanesthetized skin. Subjects will be asked to indicate pain on a visual analogue scale (VAS) from 0-10 (0: no pain; 10: worst imaginable pain) directly after each pain stimulus

Recruitment & Eligibility

Status
COMPLETED
Sex
All
Target Recruitment
15
Inclusion Criteria
  • Fitzpatrick skin type I or II
  • Age ≥18 years
  • Patient is willing and able to give written informed consent
Exclusion Criteria
  • History of keloid or hypertrophic scar formation or complicated wound healing
  • Presence of any active skin disease
  • Known allergy to local anesthesia
  • Pregnancy or lactation
  • Incompetency to understand what the procedure involves
  • Current complaints of chronic pain or other alterations in pain sensation (e.g. due to diabetes mellitus or lepra)
  • Current treatment with systemic analgesics or other medication that can influence pain sensation
  • Current treatment with anticoagulants
  • Fitzpatrick skin type III-VI
  • Excessive sun tan

Study & Design

Study Type
INTERVENTIONAL
Study Design
FACTORIAL
Arm && Interventions
GroupInterventionDescription
AHES 25 minutesAHES 25 minutesThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml solution (AHES) will be applied at this test region. 25 minutes after AHES application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
AHES 25 minutesfractional CO2 laser, 50 mJ, 5% densityThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml solution (AHES) will be applied at this test region. 25 minutes after AHES application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
LTC 5 minutesLTC 5 minutesThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment lidocaine 70 mg/g + tetracaine 70 mg/g cream (LTC) will be applied at this test region. 5 minutes after LTC application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
LTC 5 minutesfractional CO2 laser, 50 mJ, 5% densityThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment lidocaine 70 mg/g + tetracaine 70 mg/g cream (LTC) will be applied at this test region. 5 minutes after LTC application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
AHES 5 minutesAHES 5 minutesThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml solution (AHES) will be applied at this test region. 5 minutes after AHES application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
AHES 5 minutesfractional CO2 laser, 50 mJ, 5% densityThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml solution (AHES) will be applied at this test region. 5 minutes after AHES application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
AHES 15 minutesAHES 15 minutesThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml solution (AHES) will be applied at this test region. 15 minutes after AHES application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
AHES 15 minutesfractional CO2 laser, 50 mJ, 5% densityThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml solution (AHES) will be applied at this test region. 15 minutes after AHES application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
LTC 15 minutesLTC 15 minutesThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment lidocaine 70 mg/g + tetracaine 70 mg/g cream (LTC) will be applied at this test region. 15 minutes after LTC application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
LTC 15 minutesfractional CO2 laser, 50 mJ, 5% densityThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment lidocaine 70 mg/g + tetracaine 70 mg/g cream (LTC) will be applied at this test region. 15 minutes after LTC application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
LTC 25 minutesLTC 25 minutesThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment lidocaine 70 mg/g + tetracaine 70 mg/g cream (LTC) will be applied at this test region. 25 minutes after LTC application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
LTC 25 minutesfractional CO2 laser, 50 mJ, 5% densityThis test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreatment lidocaine 70 mg/g + tetracaine 70 mg/g cream (LTC) will be applied at this test region. 25 minutes after LTC application (under occlusion), a pain stimulus will be given at the test region with the fractional CO2 laser, 50 mJ, 5% density.
Unanesthetized skinfractional CO2 laser, 50 mJ, 5% densityA pain stimulus will be given at unanesthetized skin with the fractional CO2 laser, 50 mJ, 5% density
Primary Outcome Measures
NameTimeMethod
Pain scoreAfter 25 minutes application time of the anesthetics

The main study parameter is pain, as scored on a VAS from 0-10 (0: no pain; 10: worst imaginable pain).

Secondary Outcome Measures
NameTimeMethod
Pain scoreDirectly after pretreatment.

The secondary study parameter is pain, as scored on a VAS from 0-10 (0: no pain; 10: worst imaginable pain) directly after pretreatment

© Copyright 2025. All Rights Reserved by MedPath