Imaging for the Generation of Personalized Biomechanical Models of the Musculoskeletal System Before and After Surgery
Overview
- Phase
- Not Applicable
- Intervention
- Not specified
- Conditions
- Orthopedic Disorder
- Sponsor
- Centre d'Investigation Clinique et Technologique 805
- Enrollment
- 10
- Primary Endpoint
- Evaluation of simulated models regarding relative position of bones in static condition
- Last Updated
- 5 years ago
Overview
Brief Summary
Advances in biomechanical modeling of musculoskeletal systems make it possible to consider the use of a digital clone of a patient to test surgical procedure before carrying it out on the patient himself.
The study aims at evaluating the design and simulation procedure of anatomical and functional pre and post surgical patient-specific numerical models.
Detailed Description
The general research framework is focused on predicting the functional outcome of orthopaedic surgery for a given patient. Since surgery is an invasive and irreversible procedure, it may be useful to carry out surgical simulations on a digital clone before performing them on the real patient. This simulation would therefore be a tool for optimized surgical planning, based on a realistic functional objective. The investigators' work in the design and evaluation of biomechanical models is now applicable to orthopedic surgery. So, it is necessary to verify that the digital procedures allowing the realization of virtual surgical gestures are comparable to the procedures actually applied to the patient. Thus, a first retrospective study (Imaging for the generation of personalized biomechanical models of the musculoskeletal system before and after surgery - ORTHOSIM Retrospective) Clinical Trial N° NCT03835000, is in progress in order to validate the possibility of creating pre- and post-operative anatomical digital clones. The aim of this prospective study is to integrate the functional characteristics of the patient before and after surgery with the objective of dynamic validation of the biomechanical models created. OrthosimPro is a bi-centric, longitudinal and prospective study. 10 patients needing orthopedic surgery will be enrolled after being informed about the study and potential risks. They will give written informed consent. This study will not modify : * the operative indication * the surgical procedure * the management before and after the surgery Patients will have a pre and post operative assessment * Anatomical by sectional imaging * Functional by motion analysis Thus, it allows creating 3 digital models for the same patient: 1. Creation of Model 1: preoperative dynamic model obtained from the anatomical and functional preoperative assessment. 2. Creation of Model 2: Model 1 to which the surgery is applied according to the criteria indicated by the surgeon. 3. Creation of Model 3: a dynamic postoperative model independent of Models 1 and 2 obtained from the anatomical and functional postoperative assessment. Validation of each model: Each model will be compared with the patient data used to build the model, there is no comparison of patients regarding each other or models belonging to different patients. This study therefore aims to validate an individual's model on his or her own data. * Comparison of model 1 (angle, forces, geometry) versus morphological and functional assessment before surgery * Comparison of model 3 (angle, forces, geometry) versus morphological and functional assessment after surgery Evaluation the surgery simulation procedure: Comparison of model 2 (angle, forces, geometry) versus model 3
Investigators
Eligibility Criteria
Inclusion Criteria
- •If women, menopausal or on contraception if of childbearing age
- •Patients who will benefit from one of the orthopedic surgical procedures corresponding to the surgeries studied
- •Patient who is a member of a social security organization
- •Patient who has signed a written informed consent form
Exclusion Criteria
- •Patient refusal to participate in the study
- •Patient under guardianship and / or curators,
- •Patient unable to receive information and express consent
- •Pregnant and/or breastfeeding women
- •Contraindication to MRI (presence of ferromagnetic materials, neurosurgical clips, vascular, pacemaker).
- •Non-affiliation to a social security scheme (beneficiary or entitled person)
Outcomes
Primary Outcomes
Evaluation of simulated models regarding relative position of bones in static condition
Time Frame: 18 months
comparison between real data (from imaging) vs simulated data regarding relative position of bones defining a joint: angles between mechanical bone axis in degree in two situations: * angles measured on pre operative imaging versus angles obtained on model 1 * angles measured on post operative imaging versus angles obtained on model 3
Evaluation of simulated models regarding moment
Time Frame: 18 months
comparison between real data (from motion analysis) vs simulated data regarding kinetic parameters as joint moment in Newton-metre (N.m) in two situations: * moment calculated on pre operative motion analysis versus moment obtained on model 1 * moment calculated on post operative motion analysis versus moment obtained on model 3
Evaluation of simulated models regarding relative position of bones in dynamic condition: range of motion (ROM)
Time Frame: 18 months
comparison between real data (from motion analysis) vs simulated data regarding relative position of bones defining a joint: total joint range of motion (ROM) projected in anatomical planes : degree of freedom of the joint (flexion, extension, abduction, adduction, medial and lateral rotation) (Kinematic parameters) in two situations: * ROM measured on pre operative motion analysis versus ROM obtained on model 1 * ROM measured on post operative motion analysis versus ROM obtained on model 3
comparison of post surgery changes in real and simulated results regarding bone torsion
Time Frame: 18 months
comparison between real bone torsion's changes (from imaging) vs bone torsion's changes on simulated data, difference calculated in degree in one situation: - bone torsion's difference calculated on CT scan (difference between pre and post operative bone torsions) versus bone torsion's difference calculated on models (difference between bone torsions obtained on model 1 and model 3)
comparison of post surgery changes in real and simulated results regarding bone axis
Time Frame: 18 months
comparison between real bone axis changes (from imaging) vs bone axis changes on simulated data : anatomical bone axis (corresponding mainly to the diaphyseal axis)) difference calculated in degree in one situation: - bone axis difference calculated on imaging (difference between pre and post operative bone torsion) versus bone torsion's difference calculated on models (difference between bone torsions obtained on model 1 and model 3)
comparison of post surgery changes in real and simulated results regarding bone volume
Time Frame: 18 months
comparison between real bone volume changes (from imaging) vs bone volume changes on simulated data difference calculated in mm3 in one situation: - bone volume difference calculated on CT scan (difference between pre and post operative bone volumes) versus bone volume difference calculated on models (difference between bone volumes obtained on model 1 and model 3)
comparison of post surgery changes in real and simulated results regarding relative position of bones in static condition
Time Frame: 18 months
comparison between real mechanical angle changes (from imaging) vs mechanical angle changes on simulated data difference between angles (obtained from mechanical bone axis) calculated in degree in one situation: - mechanical angle difference calculated on imaging (difference between pre and post operative mechanical angles) versus mechanical angle difference calculated on models (difference between mechanical angles obtained on model 1 and model 3)
comparison of post surgery changes in real and simulated results regarding moment changes
Time Frame: 18 months
comparison between real moment changes (from motion analysis) vs moment changes on simulated data moment difference calculated in N.m in one situation: - moment difference calculated on motion analysis (difference between pre and post operative moments) versus moment difference calculated on models (difference between moments obtained on model 1 and model 3)
comparison of post surgery changes in real and simulated results regarding pressure changes
Time Frame: 18 months
comparison between real pressure changes (from motion analysis) vs pressure changes on simulated data pressure difference calculated in N/cm2 in one situation: - pressure difference calculated on motion analysis (difference between pre and post operative pressures) versus pressure difference calculated on models (difference between pressures obtained on model 1 and model 3)
Evaluation of simulated models regarding pressure
Time Frame: 18 months
comparison between real data (from motion analysis) vs simulated data regarding kinetic parameters as pressure (baropodometric analysis) in Newton per square centimeter (N/cm2) in two situations: * pressure measured on pre operative motion analysis versus pressure obtained on model 1 * pressure measured on post operative motion analysis versus pressure obtained on model 3
Evaluation of simulated models regarding forces
Time Frame: 18 months
comparison between real data (from motion analysis) vs simulated data regarding kinetic parameters as forces (ground reaction forces) in Newton (N) in two situations: * forces measured on pre operative motion analysis versus forces obtained on model 1 * forces measured on post operative motion analysis versus forces obtained on model 3
comparison of post surgery changes in real and simulated results regarding bone dimension
Time Frame: 18 months
comparison between real bone dimension's changes (from imaging) vs bone dimension's changes on simulated data difference calculated in mm in one situation: - bone dimension's difference calculated on CT scan (difference between pre and post operative bone dimensions) versus bone dimension's difference calculated on models (difference between bone dimensions obtained on model 1 and model 3)
comparison of post surgery changes in real and simulated results regarding ROM's changes
Time Frame: 18 months
comparison between real ROM'S changes (from motion analysis) vs ROM's changes on simulated data joint range of motion's difference calculated in degree in one situation: - ROM's difference calculated on motion analysis (difference between pre and post operative ROM) versus ROM's difference calculated on models (difference between ROM obtained on model 1 and model 3)
Secondary Outcomes
- Comparison of post surgery models between real and simulated surgery regarding bone torsion(18 months)
- Comparison of post surgery models between real and simulated surgery regarding pressure changes(18 months)
- Comparison of post surgery models between real and simulated surgery regarding bone axis(18 months)
- correlation of clinical scores and changes in function(18 months)
- Comparison of post surgery models between real and simulated surgery regarding bone dimension(18 months)
- Comparison of post surgery models between real and simulated surgery regarding bone volume(18 months)
- Comparison of post surgery models between real and simulated surgery regarding point-to-surface distance of bone(18 months)
- Comparison of post surgery models between real and simulated surgery regarding relative position of bones in static condition(18 months)
- Comparison of post surgery models between real and simulated surgery regarding ground reaction forces changes(18 months)
- Comparison of post surgery models between real and simulated surgery regarding moment changes(18 months)
- comparison of simulated joint force changes between Pre and post surgery models(18 months)
- Comparison of post surgery models between real and simulated surgery regarding ROM's changes(18 months)