Quantifying the Benefits and Cost-effectiveness of Real-Ear Measurements (REM) for Hearing Aid Fitting
- Conditions
- Sensorineural Hearing Loss, Bilateral
- Interventions
- Other: Hearing Aid Manufacturer's SoftwareOther: REM (Real Ear Measurements)
- Registration Number
- NCT05621798
- Lead Sponsor
- Kuopio University Hospital
- Brief Summary
Adjusting hearing aid user's real ear performance by using probe-microphone technology (real ear measurement, REM) has been a well-known procedure that verifies whether the output of the hearing aid at the eardrum matches the desired prescribed target. Still less than half of audiologists verify hearing aid fitting to match the prescribed target amplification with this technology. Recent studies have demonstrated failures to match the prescribed amplification targets, using exclusively the predictions of the proprietary software. American Speech-Language-Hearing Association (ASHA) and American Academy of Audiology (AAA) have created Best Practice Guidelines that recommend using real-ear measurement (REM) over initial fit approach and also the recent ISO 21388:2020 on hearing aid fitting management recommends the routine use of REM. Still audiologists prefer to rely on the manufacturer's default "first-fit" settings because of the lack of proof over cost-effectiveness and patient outcome in using REM. There are only few publications of varying levels of evidence indicating benefits of REM-fitted hearing aids with respect to patient outcomes that include self-reported listening ability, speech intelligibility in quiet and noise and patients' preference. Our main research question is whether REM-based fitting improves the patient reported outcome measures - PROMs (SSQ, HERE) and performance-based outcome measures (speech-reception threshold in noise) over initial fit approach. An additional research question is whether REM-based fitting improves hearing aid usage (self-reported \& log-data report). Eventually, the investigators will calculate the cost-effectiveness of REM-based fitting.
- Detailed Description
Adjusting hearing aid user's real ear performance by using probe-microphone technology (real ear measurement, REM) has been a well-known procedure over 30 years among audiologists. With this measurement technique, it is possible to verify whether the output of the hearing aid at the eardrum matches the desired prescribed target. Still less than half of audiologists verify their hearing aid fitting to match the prescribed target amplification with this technology. Many still rely on the manufacturer's default "first-fit" settings (initial fit approach) which means that the patient's hearing thresholds at any given frequency are transferred to the programming software that predicts the output and gain of the hearing aid by using proprietary or modified prescriptive algorithm. These proprietary algorithms create an approximation over patients in situ hearing aid gain and output based on data such as the age of the patient, an estimate of microphone location effects, the ear mold or shell design and length, venting size, and tubing characteristics.
Recent studies have demonstrated failures to match the prescribed amplification targets, using exclusively the predictions of the proprietary software. The American Speech-Language-Hearing Association (ASHA) and American Academy of Audiology (AAA) have created Best Practice Guidelines that recommend using real-ear measurement (REM) over initial fit approach in order to verify the prescribed gain and output of the hearing aids. Accordingly, the recent ISO 21388:2020 on hearing aid fitting management recommends the routine use of REM. So why is REM still rarely applied clinically? The main reason is the lack of proof over cost-effectiveness and patient outcome. There are only few publications of varying levels of evidence indicating benefits of REM-fitted hearing aids with respect to patient outcomes that include self-reported listening ability, speech intelligibility in quiet and noise and patients' preference. According to a very recent systematic review and meta-analyses by Almufarrij et al. published in 2021, there are only six publications that meets the inclusion criteria, and the evidence favors REM fitting for all outcomes reported (self-reported listening ability, speech intelligibility in quiet and noise and preference). Still, the quality of evidence varies across the outcomes since all articles had a rather limited number of participants and only two used power calculation to determine the sample size. None of these studies reported health-related quality of life, which was assessed to be the primary outcome by the reviewers. Also, secondary outcomes of interest including adverse events, generic quality of life and cost-effectiveness were not assessed. The authors also acknowledged the lack of sufficient follow-up duration (the maximum duration was only 6 weeks) and the lack of permission for further adjustment to the amplification characteristics. In addition, the included studies failed to investigate first-time users over experienced hearing-aid users and the amplification characteristics the experienced users were familiar with, were not reported. This was judged to possibly impact on short-term outcomes since changes of hearing-aid users' amplification characteristics that they are already accustomed to, can cause discomfort. The authors also claimed that future studies should also estimate the importance of any benefit found and evaluate the reasons why participants are reporting these benefits.
In summary, current evidence indicates that the initial fit approach often fails to achieve the prescriptive acoustic gain and output of hearing aids, however, evidence which would clearly show that REM-based hearing aid fitting (which is time-consuming) is clinically relevant and cost-effective is lacking, and thus warrants further studies.
Our main research question is whether REM-based fitting improves the patient reported outcome measures - PROMs (SSQ, HERE) and performance-based outcome measures (speech-reception threshold in noise) over initial fit approach. These are the primary outcomes of our study. An additional research question is whether REM-based fitting improves hearing aid usage (self-reported \& log-data report). Eventually, the investigators will calculate the cost-effectiveness of REM-based fitting. These are the secondary outcomes of our study.
Recruitment & Eligibility
- Status
- COMPLETED
- Sex
- All
- Target Recruitment
- 73
- all first-time adult patients (18-80 years of age) eligible for bilateral hearing aid rehabilitation based on an evaluation by an otolaryngologist or an audiologist
- confirmed cases of cognitive decline or dementia
- unilateral or conductive hearing impairment
Study & Design
- Study Type
- INTERVENTIONAL
- Study Design
- CROSSOVER
- Arm && Interventions
Group Intervention Description Hearing Aid Manufacturer's Software Group Hearing Aid Manufacturer's Software Participants' hearing aids are fitted by using manufacturer's software. REM Group Hearing Aid Manufacturer's Software Participants' hearing aids are fitted by REM (Real Ear Measurements) method. Hearing Aid Manufacturer's Software Group REM (Real Ear Measurements) Participants' hearing aids are fitted by using manufacturer's software. REM Group REM (Real Ear Measurements) Participants' hearing aids are fitted by REM (Real Ear Measurements) method.
- Primary Outcome Measures
Name Time Method Performance-based Outcome: Finnish matrix Sentence Test (FMST) Change measures: 0 months, 2 months, 4 months, 6 months. Participants will conduct Finnish Matrix Sentence Test (FMST) during every clinical visit. This test measures participants' speech perception in noise.
Patient Related Outcome Measure: Speech, Spatial and Qualities of Hearing Scale (SSQ) Change measures: 0 months, 2 months, 4 months, 6 months. Participants are asked to fill out SSQ questionnaire during every clinical visit. This questionnaire includes 49 items with a numeric rating scale from 0 to 10 for each item and allows the assessment of hearing with and without hearing aids. Higher scores mean better outcome.
Patient Related Outcome Measure: Hearing in Real-Life Environments (HERE) Change measures: 0 months, 2 months, 4 months, 6 months. Participants are asked to fill out HERE questionnaire during every clinical visit. Questionnaire includes 15 items with a numeric rating scale from 0 to 10 for each item and allows the assessment of hearing with and without hearing aids. Higher scores mean worse outcome.
Performance-based Outcome: Digit Triple Test (DTT) Change measures: 0 months, 2 months, 4 months, 6 months. Participants will conduct Digit Triple Test (DTT) during every clinical visit. This test measures participants' speech perception in noise.
- Secondary Outcome Measures
Name Time Method Objective differences of the fitting parameters Change measures: 0 months and 2 months Difference in desibel levels between initial fit and REM
Fitting preference 12 months after the beginning of clinical visits Participants' preferences are measured by likert scale (1-10).
Hearing aid usage 12 months after the beginning of clinical visits Participants' self-reported hearing aid usage and log-data report are recorded.
Cost effectiveness Between 0-12 months. Additional time consumption for REM and number of additional contacts to the clinic are recorded.
Trial Locations
- Locations (1)
Kuopio University Hospital
🇫🇮Kuopio, Finland