- Approval Id
- 5b9cc5d8c2d56665
- Drug Approval Emc Name
- Melphalan 50 mg Powder and Solvent for Solution for Injection/Infusion
- Drug Name
- Melphalan 50 mg Powder and Solvent for Solution for Injection/Infusion
- Company Name
- Aspen
- Company Address
- 3016 Lake Drive, Citywest Business Campus, Dublin 24, Ireland
- Company Telephone
- + 44 1748 828 391
- Company Medical Info Direct Line
- 0800 0087 392
- Company Medical Info Email
- aspenmedinfo@professionalinformation.co.uk
- Atc Code
- L01AA03
- Legal Category
- Prescription only medicine
- Authorisation Holder
- Aspen Pharma Trading Limited
3016 Lake Drive,
Citywest Business Campus,
Dublin 24, Ireland
- Authorisation Number
- \*\*PL 39699/ 0039 (Powder for Solution)\*\*
\*\*PL 39699/0040 (Solvent for Solution)\*\*
- Authorisation Date
- 18 January 2004
- Instruction Authorisation Holder
- Aspen Pharma Trading Limited
3016 Lake Drive,
Citywest Business Campus,
Dublin 24, Ireland
- Instruction Authorisation Number
- \*\*PL 39699/ 0039 (Powder for Solution)\*\*
\*\*PL 39699/0040 (Solvent for Solution)\*\*
- Instruction Authorisation Date
- 18 January 2004
- Instruction Composition
- Melphalan Hydrochloride BP equivalent to 50 mg mephalan per vial.
- Instruction Dosage Form
- Freeze-dried powder for solution for injection/infusion.
- Instruction Clinical Particulars
- 4.1 Therapeutic indications
Melphalan Injection, at conventional intravenous dosage, is indicated in the treatment of multiple myeloma and ovarian cancer.
Melphalan Injection, at high intravenous dosage, is indicated, with or without haematopoietic stem cell transplantation, for the treatment of multiple myeloma and childhood neuroblastoma.
Melphalan Injection, administered by regional arterial perfusion, is indicated in the treatment of localised malignant melanoma of the extremities and localised soft tissue sarcoma of the extremities.
In the above indications, Melphalan may be used alone or in combination with other cytotoxic drugs.4.2 Posology and method of administration
\*Thromboembolic events\*
Thromboprophylaxis should be administered for at least the first 5 months of treatment especially in patients with additional thrombotic risk factors. The decision to take antithrombotic prophylactic measures should be made after careful assessment of an individual patient's underlying risk factors (see sections Warning and Precaution and Adverse Reactions).
If the patient experiences any thromboembolic events, treatment must be discontinued and standard anticoagulation therapy started. Once the patient has been stabilised on the anticoagulation treatment and any complications of the thromboembolic event have been managed, melphalan in combination with lenalidomide and prednisone or thalidomide and prednisone or dexamethasone may be restarted at the original dose dependent upon a benefit-risk assessment. The patient should continue anticoagulation therapy during the course of melphalan treatment.
Posology
\*Parenteral administration\*
Melphalan Injection is for intravenous use and regional arterial perfusion only. Melphalan Injection should not be given without haematopoietic stem cell rescue at doses of above 140 mg/m2.
For intravenous administration, it is recommended that Melphalan Injection solution is injected slowly into a fast-running infusion solution via a swabbed injection port.
If direct injection into a fast-running infusion is not appropriate, Melphalan Injection solution may be administered diluted in an infusion bag.
Melphalan is not compatible with infusion solutions containing dextrose and it is recommended that only sodium chloride intravenous infusion 0.9% w/v is used.
When further diluted in an infusion solution, Melphalan has reduced stability and the rate of degradation increases rapidly with rise in temperature. If Melphalan is infused at a room temperature of approximately 25°C, the total time from preparation of the injection solution to the completion of infusion should not exceed 1.5 hours.
Should any visible turbidity or crystallisation appear in the reconstituted or diluted solutions, the preparation must be discarded.
Care should be taken to avoid possible extravasation of Melphalan and in cases of poor peripheral venous access, consideration should be given to use of a central venous line.
If high dose Melphalan Injection is administered with or without autologous bone marrow transplantation, administration via a central venous line is recommended.
For regional arterial perfusion, the literature should be consulted for detailed methodology.
\*Multiple myeloma\*
Melphalan Injection is administered on an intermittent basis alone, or in combination with other cytotoxic drugs. Administration of prednisone has also been included in a number of regimens.
When used as a single agent, a typical intravenous Melphalan dosage schedule is 0.4 mg/kg body weight (16 mg/m2 body surface area) repeated at appropriate intervals (e.g. once every 4 weeks), provided there has been recovery of the peripheral blood count during this period.
High-dose regimens generally employ single intravenous doses of between 100 and 200 mg/m2 body surface area (approximately 2.5 to 5.0 mg/kg body weight), but haematopoietic stem cell rescue becomes essential following doses in excess of 140 mg/m2 body surface area. Hydration and forced diuresis are also recommended.
\*Ovarian adenocarcinoma\*
When used intravenously as a single agent, a dose of 1 mg/kg body weight (approximately 40 mg/m2 body surface area) given at intervals of 4 weeks has often been used.
When combined with other cytotoxic drugs, intravenous doses of between 0.3 and 0.4 mg/kg body weight (12 to 16 mg/m2 body surface area) have been used at intervals of 4 to 6 weeks.
\*Advanced neuroblastoma\*
Doses of between 100 and 240 mg/m2 body surface area (sometimes divided equally over 3 consecutive days) together with haematopoietic stem cell rescue, have been used either alone or in combination with radiotherapy and/or other cytotoxic drugs.
\*Malignant melanoma\*
Hyperthermic regional perfusion with Melphalan has been used as an adjuvant to surgery for early malignant melanoma and as palliative treatment for advanced but localised disease. The scientific literature should be consulted for details of perfusion technique and dosage used. A typical dose range for upper extremity perfusions is 0.6-1.0 mg/kg bodyweight and for lower extremity perfusions is 0.8-1.5 mg/kg body weight.
\*Soft tissue sarcoma\*
Hyperthermic regional perfusion with Melphalan has been used in the management of all stages of localised soft tissue sarcoma, usually in combination with surgery. A typical dose range for upper extremity perfusions is 0.6-1.0 mg/kg body weight and for lower extremity perfusions is 1-1.4 mg/kg body weight.
Melphalan has also been given with actinomycin D, and the scientific literature should be consulted for details of dosage regimens.
\*Paediatric population\*
Melphalan, at conventional dosage, is only rarely indicated in paediatrics and dosage guidelines cannot be stated.
High dose Melphalan Injection, in association with haematopoietic stem cell rescue, has been used in childhood neuroblastoma and dosage guidelines based on body surface area, as for adults, may be used.
\*Elderly population\*
Although Melphalan is frequently used at conventional dosage in older people, there is no specific information available relating to its administration to this patient sub-group.
Experience in the use of high dose Melphalan in older patients is limited. Consideration should therefore be given to ensure adequate performance status and organ function, before using high dose Melphalan Injection in older patients.
\*Dosage in renal impairment\*
Melphalan clearance, though variable, may be decreased in renal impairment.
Currently available pharmacokinetic data do not justify an absolute recommendation on dosage reduction when administering Melphalan Tablets to patients with renal impairment, but it may be prudent to use a reduced dosage initially until tolerance is established.
When Melphalan Injection is used at conventional intravenous dosage (8-40 mg/m2 body surface area), it is recommended that the initial dose should be reduced by 50% and subsequent dosage determined according to the degree of haematological suppression.
For high intravenous doses of Melphalan (100 to 240 mg/m2 body surface area), the need for dose reduction depends upon the degree of renal impairment, whether haematopoietic stem cells are re-infused, and therapeutic need. Melphalan Injection should not be given without haematopoietic stem cell rescue at doses of above 140 mg/m2.
As a guide, for high dose Melphalan treatment without haematopoietic stem cell rescue in patients with moderate renal impairment (creatinine clearance 30 to 50 ml/min) a dose reduction of 50% is usual. High dose Melphalan (above 140 mg/m2) without haematopoietic stem cell rescue should not be used in patients with more severe renal impairment.
High dose Melphalan with haematopoietic stem cell rescue has been used successfully even in dialysis dependent patients with end-stage renal failure. The relevant literature should be consulted for details.
Method of administration
Injection / infusion
For instructions on reconstitution of the medicinal product before administration, see section 6.6.
After reconstitution the appearance of the product should be a clear solution, see section 6.6.4.3 Contraindications
• Hypersensitivity to the active substance or to any of the excipients listed in section 6.1
• Lactation4.4 Special warnings and precautions for use
Melphalan is a cytotoxic drug, which falls into the general class of alkylating agents. It should be prescribed only by physicians experienced in the management of malignant disease with such agents.
As with all high dose chemotherapy, precautions should be taken to prevent tumour lysis syndrome.
Immunisation using a live organism vaccine has the potential to cause infection in immunocompromised hosts. Therefore, immunisations with live organism vaccines are not recommended.
Since Melphalan is myelosuppressive, frequent blood counts are essential during therapy and the dosage should be delayed or adjusted if necessary.
Melphalan Injection solution can cause local tissue damage, should extravasation occur and consequently, it should not be administered by direct injection into a peripheral vein. It is recommended that Melphalan Injection solution is administered by injecting slowly into a fast-running intravenous infusion via a swabbed injection port, or via a central venous line.
In view of the hazards involved and the level of supportive care required, the administration of high dose Melphalan Injection should be confined to specialist centres, with the appropriate facilities and only be conducted by experienced clinicians.
In patients receiving high dose Melphalan Injection, consideration should be given to the prophylactic administration of anti-infective agents and the administration of blood products as required.
Consideration should be given to ensure adequate performance status and organ function before using high dose Melphalan Injection. Melphalan Injection should not be given without haematopoietic stem cell rescue at doses of above 140 mg/m2.
Safe handling of Melphalan
The handling of Melphalan formulations should follow guidelines for the handling of cytotoxic drugs according to the Royal Pharmaceutical Society of Great Britain Working Party on the handling of cytotoxic drugs.
Monitoring
Since Melphalan is a potent myelosuppressive agent, it is essential that careful attention should be paid to the monitoring of blood counts, to avoid the possibility of excessive myelosuppression and the risk of irreversible bone marrow aplasia. Blood counts may continue to fall after treatment is stopped, so at the first sign of an abnormally large fall in leukocyte or platelet counts, treatment should be temporarily interrupted. Melphalan should be used with caution in patients who have undergone recent radiotherapy or chemotherapy in view of increased bone marrow toxicity.
Renal Impairment
Melphalan clearance may be reduced in patients with renal impairment who may also have uraemic marrow suppression. Dose reduction may therefore be necessary (see section 4.2 and 4.8).
The use of high dose melphalan has the potential to cause acute kidney injury in patients, especially those with underlying renal impairment and potential risk factors for reduced renal function (e.g., concomitant use of nephrotoxic medications, amyloidosis etc).
Mutagenicity
Melphalan is mutagenic in animals and chromosome aberrations have been observed in patients being treated with the drug.
Carcinogenicity (secondary primary malignancy)
Acute myeloid leukaemia (AML) and myelodysplastic syndromes (MDS)
Melphalan, in common with other alkylating agents, has been reported to be leukaemogenic especially in older patients after long combination therapy and radiotherapy. There have been reports of acute leukaemia occurring after melphalan treatment for diseases such as amyloidosis, malignant melanoma, multiple myeloma, macroglobulinaemia, cold agglutinin syndrome and ovarian cancer.
A comparison of patients with ovarian cancer who received alkylating agents with those who did not, showed that the use of alkylating agents, including melphalan, significantly increased the incidence of acute leukaemia.
Before the start of the treatment, the leukaemogenic risk (AML and MDS) must be balanced against the potential therapeutic benefit in particular if the use of melphalan in combination with thalidomide or lenalidomide and prednisone is considered, as it has been shown that these combinations increase the leukaemogenic risk. Before, during and after treatment doctors must therefore examine the patient at all times by usual measurements to ensure the early detection of cancer and initiate treatment if necessary.
Contraception
Ovulation inhibitory progesterone-only pills (i.e., desogestrel). Because of the increased risk of venous thromboembolism in patients with multiple myeloma, combined oral contraceptive pills are not recommended. If a patient is currently using combined oral contraception, she should switch to another effective and reliable contraceptive method. The risk of venous thromboembolism continues for 4−6 weeks after discontinuing combined oral contraception.
The recommended duration of contraception in females should be during treatment and for a period of six months following the cessation of treatment (see section 4.6).
Male patients should use effective and reliable contraceptive methods during treatment and for a period of three months following the cessation of treatment (see section 4.6).
Fertility
Male patients should and that they have a consultation on sperm preservation before treatment due to the possibility of irreversible infertility as a result of melphalan treatment (see section 4.6).
Excipients with known effects
This medicinal product contains 2mmol (46 mg) sodium per vial. To be taken into consideration by patients on a controlled sodium diet.
This medicinal product contains 5 % ethanol (alcohol), equivalent to 10 ml beer or 4.2 ml wine. Harmful for those suffering from alcoholism. To be taken into account in pregnant or breast-feeding women, children and high-risk groups such as patients with liver disease, or epilepsy.
This medicinal product contains propylene glycol. May cause alcohol-like symptoms.
\*Solid tumours\*
Use of alkylating agents has been linked with the development of second primary malignancy (SPM). In particular, melphalan in combination with lenalidomide and prednisone and, to a lesser extent, thalidomide and prednisone has been associated with the increased risk of solid SPM in elderly newly diagnosed multiple myeloma patients.
Patient characteristics (e.g. age, ethnicity), primary indication and treatment modalities (e.g. radiation therapy, transplantation), as well as environmental risk factors (e.g., tobacco use) should be evaluated prior to melphalan administration.4.5 Interaction with other medicinal products and other forms of interaction
Live organism vaccines
Vaccinations with live organism vaccines are not recommended in immunocompromised individuals (see section 4.4).
Nalidixic acid
Nalidixic acid together with high-dose intravenous melphalan has caused deaths in children due to haemorrhagic entercolitis.
In paediatric population, for the Busulfan-Melphalan regimen it has been reported that the administration of melphalan less than 24 hours after the last oral busulfan administration may influence the development of toxicities.
Cyclosporin
Impaired renal function has been described in bone marrow transplant patients who received high dose intravenous melphalan and who subsequently received ciclosporin to prevent graft-versus-host disease.4.6 Fertility, pregnancy and lactation
Women of childbearing potential / Contraception in males and females
Female patients should use effective and reliable contraceptive methods during treatment and for a period of six months, following the cessation of treatment.
Male patients should use effective and reliable contraceptive methods during treatment and for a period of three months following the cessation of treatment.
The final decision regarding the additional time period on contraception should be taken by the doctor and/or the patient (see section 4.4).
Pregnancy
The use of melphalan should be avoided whenever possible during pregnancy, particularly during the first trimester. In any individual case, the potential hazard to the foetus must be balanced against the expected benefit to the mother.
As with all cytotoxic chemotherapy, adequate contraceptive precautions should be practised when either partner is receiving Melphalan.
Breast-Feeding
Mothers receiving Melphalan should not breast-feed.
Fertility
Melphalan causes suppression of ovarian function in premenopausal women resulting in amenorrhoea in a significant number of patients.
There is evidence from some animal studies that Melphalan can have an adverse effect on spermatogenesis (see section 5.3.). Therefore, it is possible that Melphalan may cause temporary or permanent sterility in male patients. It is recommended that men who are receiving treatment with Melphalan have a consultation on sperm preservation before treatment due to the possibility of irreversible infertility as a result of Melphalan treatment (see section 4.4).
Teratogenicity
The teratogenic potential of Melphalan has not been studied. In view of its mutagenic properties and structural similarity to known teratogenic compounds, it is possible that melphalan could cause congenital defects in the offspring of patients treated with the drug.4.7 Effects on ability to drive and use machines
Effects on the ability to drive and operate machinery in patients taking this medicine have not been studied..4.8 Undesirable effects
For this product there is no modern clinical documentation which can be used as support for determining the frequency of undesirable effects. Undesirable effects may vary in their incidence depending on the indication and dose received and also when given in combination with other therapeutic agents.
The following convention has been utilised for the classification of frequency: Very common ≥1/10, common ≥1/100, <1/10, uncommon ≥1/1000 and <1/100, rare ≥1/10,000 and <1/1000, very rare <1/10,000, not known (cannot be estimated from the available data).
| | | |
| --- | --- | --- |
| Body System | Frequency | Side Effects |
| Neoplasms benign, malignant and unspecified (including cysts and polyps) | Not known | Secondary acute myeloid leukaemia and myelodysplastic syndrome (see section 4.4) |
| Blood and Lymphatic System Disorders | Very common | bone marrow depression leading to leucopenia, thrombocytopenia and anaemia |
| Rare | haemolytic anaemia |
| Immune System Disorders | Rare | hypersensitivity1 (see Skin and Subcutaneous Tissue Disorders) |
| Respiratory, Thoracic and Mediastinal Disorders | Rare | interstitial lung disease and pulmonary fibrosis (including fatal reports) |
| Gastrointestinal Disorders | Very common | at high dose2: nausea, vomiting and diarrhoea; stomatitis |
| Rare | stomatitis at conventional dose |
| Hepatobiliary Disorders | Rare | liver disorders ranging from abnormal liver function tests to clinical manifestations such as hepatitis and jaundice; veno-occlusive disease following high dose treatment |
| Skin and Subcutaneous Tissue Disorders | Very common | alopecia at high dose |
| Common | alopecia at conventional dose |
| Rare | rash maculo-papular and pruritus (see Immune System Disorders) |
| Musculoskeletal and Connective Tissue Disorders3 | Very common | muscle atrophy, muscle fibrosis, myalgia, blood creatine phosphokinase increased |
| Common | compartment syndrome |
| Not known | muscle necrosis, rhabdomyolysis |
| Renal and Urinary Disorders | Common | blood urea increased4 |
| Not known | Acute kidney injury |
| Reproductive system and breast disorders | Not known | azoospermia, amenorrhoea |
| Vascular Disorders5 | Not known | deep vein thrombosis and pulmonary embolism |
| General Disorders and Administration Site Conditions | Very common | subjective and transient: hot and/or application site paraesthesia, pyrexia |
1. Allergic reactions to melphalan such as urticaria, oedema, skin rashes and anaphylactic shock have been reported uncommonly following initial or subsequent dosing, particularly after intravenous administration. Cardiac arrest has also been reported rarely in association with such events.
2. The incidence of diarrhoea, vomiting and stomatitis becomes the dose-limiting toxicity in patients given high intravenous doses of melphalan in association with autologous bone marrow transplantation. Cyclophosphamide pretreatment appears to reduce the severity of gastro-intestinal damage induced by high-dose melphalan and the literature should be consulted for details.
3. Only with melphalan infusion after administration of regional perfusion in the limb
4. Temporary significant elevation of the blood urea has been commonly seen in the early stages of melphalan therapy in myeloma patients with renal damage
5. The clinically important adverse reactions associated with the use of melphalan in combination with thalidomide and prednisone or dexamethasone and to a lesser extend melphalan with lenalidomide and prednisone include: deep vein thrombosis and pulmonary embolism (see sections 4.2 and 4.4).
Reporting of suspected adverse reactions
Reporting suspected adverse reactions after authorisation of the medicinal product is important. It allows continued monitoring of the benefit/risk balance of the medicinal product. Healthcare professionals are asked to report any suspected adverse reactions via the Yellow Card Scheme at www.mhra.gov.uk/yellowcard.4.9 Overdose
The immediate effects of acute intravenous overdosage are nausea and vomiting. Damage to the gastro-intestinal mucosa may also ensue and diarrhoea, sometimes haemorrhagic, has been reported after overdosage.
The principal toxic effect is bone marrow suppression, leading to leucopenia, thrombocytopenia and anaemia.
General supportive measures, together with appropriate blood and platelet transfusions, should be instituted if necessary and consideration given to hospitalisation, antibiotic cover, the use of haematological growth factors.
There is no specific antidote. The blood picture should be closely monitored for at least four weeks following overdosage until there is evidence of recovery.
- Instruction Pharmacology
- 5.1 Pharmacodynamic properties
Pharmacotherapeutic group: antineoplastic and immunomodulating agents, antineoplastic agents, alkylating agents, nitrogen mustard analogues, ATC code: L01AA03
Mechanism of action
Melphalan is a bifunctional alkylating agent. Formation of carbonium intermediates from each of the two bis-2-chloroethyl groups enables alkylation through covalent binding with the 7-nitrogen of guanine on DNA, cross-linking the two DNA strands and thereby preventing cell replication.5.2 Pharmacokinetic properties
Absorption
The absorption of oral melphalan is highly variable with respect to both the time to first appearance of the drug in plasma and peak plasma concentration.
In studies of the absolute bioavailability of melphalan the mean absolute bioavailability ranged from 56 to 85%.
Intravenous administration can be used to avoid variability in absorption associated with myeloablative treatment.
Distribution
Melphalan is moderately bound to plasma proteins with reported percent binding ranging from 69% to 78%. There is evidence that the protein binding is linear in the range of plasma concentrations usually achieved in standard dose therapy, but that the binding may become concentration-dependent at the concentrations observed in high-dose therapy. Serum albumin is the major binding protein, accounting for about 55 to 60% the binding, and 20% is bound to α1-acid glycoprotein. In addition, melphalan binding studies have revealed the existence of an irreversible component attributable to the alkylation reaction with plasma proteins.
Following administration of a two-minute infusion of doses ranging from 5 to 23 mg/m2 body surface area (approximately 0.1 to 0.6 mg/kg bodyweight) to 10 patients with ovarian cancer or multiple myeloma, the mean volumes of distribution at steady state and central compartment were 29.1 ± 13.6 litres and 12.2 ± 6.5 litres, respectively.
In 28 patients with various malignancies who were given doses of between 70 and 200 mg/m2 body surface area as a 2- to 20-min infusion, the mean volumes of distribution at steady state and central compartment were, respectively, 40.2 ± 18.3 litres and 18.2 ± 11.7 litres.
Following hyperthermic (39°C) perfusion of the lower limb with melphalan at 1.75 mg/kg bodyweight in 11 patients with advanced malignant melanoma, mean volumes of distribution at steady state and central compartment were, respectively, 2.87 ± 0.8 litres and 1.01 ± 0.28 litres.
Melphalan displays limited penetration of the blood-brain barrier. Several investigators have sampled cerebrospinal fluid and found no measurable drug. Low concentrations (~10% of that in plasma) were observed in a single high-dose study in children.
Biotransformation
\*In vivo\* and \*in vitro\* data suggest that spontaneous degradation rather than enzymatic metabolism is the major determinant of the drug's half-life in man.
Elimination
In 13 patients given oral melphalan at 0.6 mg/kg bodyweight, the plasma mean terminal elimination half-life was 90 ± 57 min with 11% of the drug being recovered in the urine over 24 h.
In 8 patients given a single bolus dose of 0.5 to 0.6 mg/kg bodyweight, the composite initial and terminal half-lives were reported to be 7.7 ± 3.3 min and 108 ± 20.8 min, respectively. Following injection of melphalan, monohydroxymelphalan and dihydroxymelphalan were detected in the patients' plasma, reaching peak levels at approximately 60 min and 105 min, respectively. A similar half-life of 126 ± 6 min was seen when melphalan was added to the patients' serum \*in vitro\* (37°C), suggesting that spontaneous degradation rather than enzymic metabolism may be the major determinant of the drug's half-life in man.
Following administration of a two-minute infusion of doses ranging from 5 to 23 mg/m2 body surface area (approximately 0.1 to 0.6 mg/kg bodyweight) to 10 patients with ovarian cancer or multiple myeloma, the pooled initial and terminal half-lives were, respectively, 8.1 ± 6.6 min and 76.9 ± 40.7 min. A mean clearance of 342.7 ± 96.8 ml/min was recorded.
In 15 children and 11 adults given high-dose i.v. melphalan (140 mg/m2 body surface area) with forced diuresis, the mean initial and terminal half-lives were found to be 6.5 ± 3.6 min and 41.4 ± 16.5 min, respectively. Mean initial and terminal half-lives of 8.8 ± 6.6 min and 73.1 ± 45.9 min, respectively, were recorded in 28 patients with various malignancies who were given doses of between 70 and 200 mg/m2 body surface area as a 2- to 20-min infusion. The mean clearance was 564.6 ± 159.1 ml/min.
Following hyperthermic (39°C) perfusion of the lower limb with 1.75 mg/kg bodyweight, mean initial and terminal half-lives of 3.6 ± 1.5 min and 46.5 ± 17.2 min, respectively, were recorded in 11 patients with advanced malignant melanoma. A mean clearance of 55.0 ± 9.4 ml/min was recorded.
Special Patient Populations
\*Renal impairment\*
Melphalan clearance may be decreased in renal impairment (see section 4.2 and 4.4).
\*Elderly\*
No correlation has been shown between age and melphalan clearance or with melphalan terminal elimination half-life (see section 4.2).5.3 Preclinical safety data
Fertility Studies
In mice, melphalan administered intraperitoneally at a dose of 7.5 mg/kg, showed reproductive effects attributable to cytotoxicity in specific male germ cell stages and induced dominant lethal mutations and heritable translocations in post-meiotic germ cells, particularly in mid to late stage spermatids.
A study was performed to measure the total reproductive capacity of melphalan in female mice. Females received a single intraperitoneal dose of 7.5 mg/kg melphalan and were then housed with an untreated male for most of their reproductive life span (a minimum of 347 days post-treatment). A pronounced reduction in litter size occurred within the first post-treatment interval, followed by an almost complete recovery. Thereafter, a gradual decline in litter size occurred. This was simultaneous with a reduction in the proportion of productive females, a finding associated with an induced reduction in the number of small follicles (see section 4.6).
- Instruction Pharmaceutical Particulars
- 6.1 List of excipients
| | |
| --- | --- |
| Hydrochloric Acid Povidone K12 Water for Injections | Ph.Eur. Ph.Eur. BP |
The solvent for solution contains sodium citrate, propylene glycol and ethanol.6.2 Incompatibilities
None known.6.3 Shelf life
36 months.6.4 Special precautions for storage
Store below 30°C
Protect from light
Do not refrigerate.
Keep out of the sight and reach of children.6.5 Nature and contents of container
Clear, neutral glass vial and bromobutyl rubber stopper with an aluminium collar.
Pack size: 50 mg6.6 Special precautions for disposal and other handling
Preparation of Melphalan Injection Solution:
Melphalan Injection should be prepared at room temperature (approximately 25°C), by reconstituting the freeze-dried powder with the solvent-diluent provided.
It is important that both the freeze-dried powder and the solvent provided are at room temperature before starting reconstitution. Warming the diluent in the hand may aid reconstitution. If the solvent-diluent is used at cold temperature, mephalan powder may not reconstitute properly and undissolved particles may be observed.
10 ml of the vehicle should be added quickly, as a single quantity into the vial containing the freeze dried powder, and immediately shaken vigorously (for at least 50 seconds) until a clear solution, without visible particles, is obtained. Each vial must be reconstituted individually in this manner. Slow diluents addition and delaying the shaking may lead to the formation of insoluble particles. It should be also noticed that the shaking process creates a considerable amount of very small air bubbles. These bubbles may persist and may take further 2 or 3 minutes to clear, as the resulting solution is quite viscous. This could make difficult the evaluation on solution clearness.
The resulting solution contains the equivalent of 5 mg per ml anhydrous melphalan and has a pH of approximately 6.5.
Melphalan Injection solution has limited stability and should be prepared immediately before use. Any solution unused after one hour should be discarded according to standard guidelines for handling and disposal of cytotoxic drugs.
The reconstituted solution should not be refrigerated as this will cause precipitation.
- Instruction Content
- ## Composition
Melphalan Hydrochloride BP equivalent to 50 mg mephalan per vial.
## Pharmaceutical Form
Freeze-dried powder for solution for injection/infusion.
## Clinical Particulars
4.1 Therapeutic indications
Melphalan Injection, at conventional intravenous dosage, is indicated in the treatment of multiple myeloma and ovarian cancer.
Melphalan Injection, at high intravenous dosage, is indicated, with or without haematopoietic stem cell transplantation, for the treatment of multiple myeloma and childhood neuroblastoma.
Melphalan Injection, administered by regional arterial perfusion, is indicated in the treatment of localised malignant melanoma of the extremities and localised soft tissue sarcoma of the extremities.
In the above indications, Melphalan may be used alone or in combination with other cytotoxic drugs.4.2 Posology and method of administration
\*Thromboembolic events\*
Thromboprophylaxis should be administered for at least the first 5 months of treatment especially in patients with additional thrombotic risk factors. The decision to take antithrombotic prophylactic measures should be made after careful assessment of an individual patient's underlying risk factors (see sections Warning and Precaution and Adverse Reactions).
If the patient experiences any thromboembolic events, treatment must be discontinued and standard anticoagulation therapy started. Once the patient has been stabilised on the anticoagulation treatment and any complications of the thromboembolic event have been managed, melphalan in combination with lenalidomide and prednisone or thalidomide and prednisone or dexamethasone may be restarted at the original dose dependent upon a benefit-risk assessment. The patient should continue anticoagulation therapy during the course of melphalan treatment.
Posology
\*Parenteral administration\*
Melphalan Injection is for intravenous use and regional arterial perfusion only. Melphalan Injection should not be given without haematopoietic stem cell rescue at doses of above 140 mg/m2.
For intravenous administration, it is recommended that Melphalan Injection solution is injected slowly into a fast-running infusion solution via a swabbed injection port.
If direct injection into a fast-running infusion is not appropriate, Melphalan Injection solution may be administered diluted in an infusion bag.
Melphalan is not compatible with infusion solutions containing dextrose and it is recommended that only sodium chloride intravenous infusion 0.9% w/v is used.
When further diluted in an infusion solution, Melphalan has reduced stability and the rate of degradation increases rapidly with rise in temperature. If Melphalan is infused at a room temperature of approximately 25°C, the total time from preparation of the injection solution to the completion of infusion should not exceed 1.5 hours.
Should any visible turbidity or crystallisation appear in the reconstituted or diluted solutions, the preparation must be discarded.
Care should be taken to avoid possible extravasation of Melphalan and in cases of poor peripheral venous access, consideration should be given to use of a central venous line.
If high dose Melphalan Injection is administered with or without autologous bone marrow transplantation, administration via a central venous line is recommended.
For regional arterial perfusion, the literature should be consulted for detailed methodology.
\*Multiple myeloma\*
Melphalan Injection is administered on an intermittent basis alone, or in combination with other cytotoxic drugs. Administration of prednisone has also been included in a number of regimens.
When used as a single agent, a typical intravenous Melphalan dosage schedule is 0.4 mg/kg body weight (16 mg/m2 body surface area) repeated at appropriate intervals (e.g. once every 4 weeks), provided there has been recovery of the peripheral blood count during this period.
High-dose regimens generally employ single intravenous doses of between 100 and 200 mg/m2 body surface area (approximately 2.5 to 5.0 mg/kg body weight), but haematopoietic stem cell rescue becomes essential following doses in excess of 140 mg/m2 body surface area. Hydration and forced diuresis are also recommended.
\*Ovarian adenocarcinoma\*
When used intravenously as a single agent, a dose of 1 mg/kg body weight (approximately 40 mg/m2 body surface area) given at intervals of 4 weeks has often been used.
When combined with other cytotoxic drugs, intravenous doses of between 0.3 and 0.4 mg/kg body weight (12 to 16 mg/m2 body surface area) have been used at intervals of 4 to 6 weeks.
\*Advanced neuroblastoma\*
Doses of between 100 and 240 mg/m2 body surface area (sometimes divided equally over 3 consecutive days) together with haematopoietic stem cell rescue, have been used either alone or in combination with radiotherapy and/or other cytotoxic drugs.
\*Malignant melanoma\*
Hyperthermic regional perfusion with Melphalan has been used as an adjuvant to surgery for early malignant melanoma and as palliative treatment for advanced but localised disease. The scientific literature should be consulted for details of perfusion technique and dosage used. A typical dose range for upper extremity perfusions is 0.6-1.0 mg/kg bodyweight and for lower extremity perfusions is 0.8-1.5 mg/kg body weight.
\*Soft tissue sarcoma\*
Hyperthermic regional perfusion with Melphalan has been used in the management of all stages of localised soft tissue sarcoma, usually in combination with surgery. A typical dose range for upper extremity perfusions is 0.6-1.0 mg/kg body weight and for lower extremity perfusions is 1-1.4 mg/kg body weight.
Melphalan has also been given with actinomycin D, and the scientific literature should be consulted for details of dosage regimens.
\*Paediatric population\*
Melphalan, at conventional dosage, is only rarely indicated in paediatrics and dosage guidelines cannot be stated.
High dose Melphalan Injection, in association with haematopoietic stem cell rescue, has been used in childhood neuroblastoma and dosage guidelines based on body surface area, as for adults, may be used.
\*Elderly population\*
Although Melphalan is frequently used at conventional dosage in older people, there is no specific information available relating to its administration to this patient sub-group.
Experience in the use of high dose Melphalan in older patients is limited. Consideration should therefore be given to ensure adequate performance status and organ function, before using high dose Melphalan Injection in older patients.
\*Dosage in renal impairment\*
Melphalan clearance, though variable, may be decreased in renal impairment.
Currently available pharmacokinetic data do not justify an absolute recommendation on dosage reduction when administering Melphalan Tablets to patients with renal impairment, but it may be prudent to use a reduced dosage initially until tolerance is established.
When Melphalan Injection is used at conventional intravenous dosage (8-40 mg/m2 body surface area), it is recommended that the initial dose should be reduced by 50% and subsequent dosage determined according to the degree of haematological suppression.
For high intravenous doses of Melphalan (100 to 240 mg/m2 body surface area), the need for dose reduction depends upon the degree of renal impairment, whether haematopoietic stem cells are re-infused, and therapeutic need. Melphalan Injection should not be given without haematopoietic stem cell rescue at doses of above 140 mg/m2.
As a guide, for high dose Melphalan treatment without haematopoietic stem cell rescue in patients with moderate renal impairment (creatinine clearance 30 to 50 ml/min) a dose reduction of 50% is usual. High dose Melphalan (above 140 mg/m2) without haematopoietic stem cell rescue should not be used in patients with more severe renal impairment.
High dose Melphalan with haematopoietic stem cell rescue has been used successfully even in dialysis dependent patients with end-stage renal failure. The relevant literature should be consulted for details.
Method of administration
Injection / infusion
For instructions on reconstitution of the medicinal product before administration, see section 6.6.
After reconstitution the appearance of the product should be a clear solution, see section 6.6.4.3 Contraindications
• Hypersensitivity to the active substance or to any of the excipients listed in section 6.1
• Lactation4.4 Special warnings and precautions for use
Melphalan is a cytotoxic drug, which falls into the general class of alkylating agents. It should be prescribed only by physicians experienced in the management of malignant disease with such agents.
As with all high dose chemotherapy, precautions should be taken to prevent tumour lysis syndrome.
Immunisation using a live organism vaccine has the potential to cause infection in immunocompromised hosts. Therefore, immunisations with live organism vaccines are not recommended.
Since Melphalan is myelosuppressive, frequent blood counts are essential during therapy and the dosage should be delayed or adjusted if necessary.
Melphalan Injection solution can cause local tissue damage, should extravasation occur and consequently, it should not be administered by direct injection into a peripheral vein. It is recommended that Melphalan Injection solution is administered by injecting slowly into a fast-running intravenous infusion via a swabbed injection port, or via a central venous line.
In view of the hazards involved and the level of supportive care required, the administration of high dose Melphalan Injection should be confined to specialist centres, with the appropriate facilities and only be conducted by experienced clinicians.
In patients receiving high dose Melphalan Injection, consideration should be given to the prophylactic administration of anti-infective agents and the administration of blood products as required.
Consideration should be given to ensure adequate performance status and organ function before using high dose Melphalan Injection. Melphalan Injection should not be given without haematopoietic stem cell rescue at doses of above 140 mg/m2.
Safe handling of Melphalan
The handling of Melphalan formulations should follow guidelines for the handling of cytotoxic drugs according to the Royal Pharmaceutical Society of Great Britain Working Party on the handling of cytotoxic drugs.
Monitoring
Since Melphalan is a potent myelosuppressive agent, it is essential that careful attention should be paid to the monitoring of blood counts, to avoid the possibility of excessive myelosuppression and the risk of irreversible bone marrow aplasia. Blood counts may continue to fall after treatment is stopped, so at the first sign of an abnormally large fall in leukocyte or platelet counts, treatment should be temporarily interrupted. Melphalan should be used with caution in patients who have undergone recent radiotherapy or chemotherapy in view of increased bone marrow toxicity.
Renal Impairment
Melphalan clearance may be reduced in patients with renal impairment who may also have uraemic marrow suppression. Dose reduction may therefore be necessary (see section 4.2 and 4.8).
The use of high dose melphalan has the potential to cause acute kidney injury in patients, especially those with underlying renal impairment and potential risk factors for reduced renal function (e.g., concomitant use of nephrotoxic medications, amyloidosis etc).
Mutagenicity
Melphalan is mutagenic in animals and chromosome aberrations have been observed in patients being treated with the drug.
Carcinogenicity (secondary primary malignancy)
Acute myeloid leukaemia (AML) and myelodysplastic syndromes (MDS)
Melphalan, in common with other alkylating agents, has been reported to be leukaemogenic especially in older patients after long combination therapy and radiotherapy. There have been reports of acute leukaemia occurring after melphalan treatment for diseases such as amyloidosis, malignant melanoma, multiple myeloma, macroglobulinaemia, cold agglutinin syndrome and ovarian cancer.
A comparison of patients with ovarian cancer who received alkylating agents with those who did not, showed that the use of alkylating agents, including melphalan, significantly increased the incidence of acute leukaemia.
Before the start of the treatment, the leukaemogenic risk (AML and MDS) must be balanced against the potential therapeutic benefit in particular if the use of melphalan in combination with thalidomide or lenalidomide and prednisone is considered, as it has been shown that these combinations increase the leukaemogenic risk. Before, during and after treatment doctors must therefore examine the patient at all times by usual measurements to ensure the early detection of cancer and initiate treatment if necessary.
Contraception
Ovulation inhibitory progesterone-only pills (i.e., desogestrel). Because of the increased risk of venous thromboembolism in patients with multiple myeloma, combined oral contraceptive pills are not recommended. If a patient is currently using combined oral contraception, she should switch to another effective and reliable contraceptive method. The risk of venous thromboembolism continues for 4−6 weeks after discontinuing combined oral contraception.
The recommended duration of contraception in females should be during treatment and for a period of six months following the cessation of treatment (see section 4.6).
Male patients should use effective and reliable contraceptive methods during treatment and for a period of three months following the cessation of treatment (see section 4.6).
Fertility
Male patients should and that they have a consultation on sperm preservation before treatment due to the possibility of irreversible infertility as a result of melphalan treatment (see section 4.6).
Excipients with known effects
This medicinal product contains 2mmol (46 mg) sodium per vial. To be taken into consideration by patients on a controlled sodium diet.
This medicinal product contains 5 % ethanol (alcohol), equivalent to 10 ml beer or 4.2 ml wine. Harmful for those suffering from alcoholism. To be taken into account in pregnant or breast-feeding women, children and high-risk groups such as patients with liver disease, or epilepsy.
This medicinal product contains propylene glycol. May cause alcohol-like symptoms.
\*Solid tumours\*
Use of alkylating agents has been linked with the development of second primary malignancy (SPM). In particular, melphalan in combination with lenalidomide and prednisone and, to a lesser extent, thalidomide and prednisone has been associated with the increased risk of solid SPM in elderly newly diagnosed multiple myeloma patients.
Patient characteristics (e.g. age, ethnicity), primary indication and treatment modalities (e.g. radiation therapy, transplantation), as well as environmental risk factors (e.g., tobacco use) should be evaluated prior to melphalan administration.4.5 Interaction with other medicinal products and other forms of interaction
Live organism vaccines
Vaccinations with live organism vaccines are not recommended in immunocompromised individuals (see section 4.4).
Nalidixic acid
Nalidixic acid together with high-dose intravenous melphalan has caused deaths in children due to haemorrhagic entercolitis.
In paediatric population, for the Busulfan-Melphalan regimen it has been reported that the administration of melphalan less than 24 hours after the last oral busulfan administration may influence the development of toxicities.
Cyclosporin
Impaired renal function has been described in bone marrow transplant patients who received high dose intravenous melphalan and who subsequently received ciclosporin to prevent graft-versus-host disease.4.6 Fertility, pregnancy and lactation
Women of childbearing potential / Contraception in males and females
Female patients should use effective and reliable contraceptive methods during treatment and for a period of six months, following the cessation of treatment.
Male patients should use effective and reliable contraceptive methods during treatment and for a period of three months following the cessation of treatment.
The final decision regarding the additional time period on contraception should be taken by the doctor and/or the patient (see section 4.4).
Pregnancy
The use of melphalan should be avoided whenever possible during pregnancy, particularly during the first trimester. In any individual case, the potential hazard to the foetus must be balanced against the expected benefit to the mother.
As with all cytotoxic chemotherapy, adequate contraceptive precautions should be practised when either partner is receiving Melphalan.
Breast-Feeding
Mothers receiving Melphalan should not breast-feed.
Fertility
Melphalan causes suppression of ovarian function in premenopausal women resulting in amenorrhoea in a significant number of patients.
There is evidence from some animal studies that Melphalan can have an adverse effect on spermatogenesis (see section 5.3.). Therefore, it is possible that Melphalan may cause temporary or permanent sterility in male patients. It is recommended that men who are receiving treatment with Melphalan have a consultation on sperm preservation before treatment due to the possibility of irreversible infertility as a result of Melphalan treatment (see section 4.4).
Teratogenicity
The teratogenic potential of Melphalan has not been studied. In view of its mutagenic properties and structural similarity to known teratogenic compounds, it is possible that melphalan could cause congenital defects in the offspring of patients treated with the drug.4.7 Effects on ability to drive and use machines
Effects on the ability to drive and operate machinery in patients taking this medicine have not been studied..4.8 Undesirable effects
For this product there is no modern clinical documentation which can be used as support for determining the frequency of undesirable effects. Undesirable effects may vary in their incidence depending on the indication and dose received and also when given in combination with other therapeutic agents.
The following convention has been utilised for the classification of frequency: Very common ≥1/10, common ≥1/100, <1/10, uncommon ≥1/1000 and <1/100, rare ≥1/10,000 and <1/1000, very rare <1/10,000, not known (cannot be estimated from the available data).
| | | |
| --- | --- | --- |
| Body System | Frequency | Side Effects |
| Neoplasms benign, malignant and unspecified (including cysts and polyps) | Not known | Secondary acute myeloid leukaemia and myelodysplastic syndrome (see section 4.4) |
| Blood and Lymphatic System Disorders | Very common | bone marrow depression leading to leucopenia, thrombocytopenia and anaemia |
| Rare | haemolytic anaemia |
| Immune System Disorders | Rare | hypersensitivity1 (see Skin and Subcutaneous Tissue Disorders) |
| Respiratory, Thoracic and Mediastinal Disorders | Rare | interstitial lung disease and pulmonary fibrosis (including fatal reports) |
| Gastrointestinal Disorders | Very common | at high dose2: nausea, vomiting and diarrhoea; stomatitis |
| Rare | stomatitis at conventional dose |
| Hepatobiliary Disorders | Rare | liver disorders ranging from abnormal liver function tests to clinical manifestations such as hepatitis and jaundice; veno-occlusive disease following high dose treatment |
| Skin and Subcutaneous Tissue Disorders | Very common | alopecia at high dose |
| Common | alopecia at conventional dose |
| Rare | rash maculo-papular and pruritus (see Immune System Disorders) |
| Musculoskeletal and Connective Tissue Disorders3 | Very common | muscle atrophy, muscle fibrosis, myalgia, blood creatine phosphokinase increased |
| Common | compartment syndrome |
| Not known | muscle necrosis, rhabdomyolysis |
| Renal and Urinary Disorders | Common | blood urea increased4 |
| Not known | Acute kidney injury |
| Reproductive system and breast disorders | Not known | azoospermia, amenorrhoea |
| Vascular Disorders5 | Not known | deep vein thrombosis and pulmonary embolism |
| General Disorders and Administration Site Conditions | Very common | subjective and transient: hot and/or application site paraesthesia, pyrexia |
1. Allergic reactions to melphalan such as urticaria, oedema, skin rashes and anaphylactic shock have been reported uncommonly following initial or subsequent dosing, particularly after intravenous administration. Cardiac arrest has also been reported rarely in association with such events.
2. The incidence of diarrhoea, vomiting and stomatitis becomes the dose-limiting toxicity in patients given high intravenous doses of melphalan in association with autologous bone marrow transplantation. Cyclophosphamide pretreatment appears to reduce the severity of gastro-intestinal damage induced by high-dose melphalan and the literature should be consulted for details.
3. Only with melphalan infusion after administration of regional perfusion in the limb
4. Temporary significant elevation of the blood urea has been commonly seen in the early stages of melphalan therapy in myeloma patients with renal damage
5. The clinically important adverse reactions associated with the use of melphalan in combination with thalidomide and prednisone or dexamethasone and to a lesser extend melphalan with lenalidomide and prednisone include: deep vein thrombosis and pulmonary embolism (see sections 4.2 and 4.4).
Reporting of suspected adverse reactions
Reporting suspected adverse reactions after authorisation of the medicinal product is important. It allows continued monitoring of the benefit/risk balance of the medicinal product. Healthcare professionals are asked to report any suspected adverse reactions via the Yellow Card Scheme at www.mhra.gov.uk/yellowcard.4.9 Overdose
The immediate effects of acute intravenous overdosage are nausea and vomiting. Damage to the gastro-intestinal mucosa may also ensue and diarrhoea, sometimes haemorrhagic, has been reported after overdosage.
The principal toxic effect is bone marrow suppression, leading to leucopenia, thrombocytopenia and anaemia.
General supportive measures, together with appropriate blood and platelet transfusions, should be instituted if necessary and consideration given to hospitalisation, antibiotic cover, the use of haematological growth factors.
There is no specific antidote. The blood picture should be closely monitored for at least four weeks following overdosage until there is evidence of recovery.
## Pharmacological Properties
5.1 Pharmacodynamic properties
Pharmacotherapeutic group: antineoplastic and immunomodulating agents, antineoplastic agents, alkylating agents, nitrogen mustard analogues, ATC code: L01AA03
Mechanism of action
Melphalan is a bifunctional alkylating agent. Formation of carbonium intermediates from each of the two bis-2-chloroethyl groups enables alkylation through covalent binding with the 7-nitrogen of guanine on DNA, cross-linking the two DNA strands and thereby preventing cell replication.5.2 Pharmacokinetic properties
Absorption
The absorption of oral melphalan is highly variable with respect to both the time to first appearance of the drug in plasma and peak plasma concentration.
In studies of the absolute bioavailability of melphalan the mean absolute bioavailability ranged from 56 to 85%.
Intravenous administration can be used to avoid variability in absorption associated with myeloablative treatment.
Distribution
Melphalan is moderately bound to plasma proteins with reported percent binding ranging from 69% to 78%. There is evidence that the protein binding is linear in the range of plasma concentrations usually achieved in standard dose therapy, but that the binding may become concentration-dependent at the concentrations observed in high-dose therapy. Serum albumin is the major binding protein, accounting for about 55 to 60% the binding, and 20% is bound to α1-acid glycoprotein. In addition, melphalan binding studies have revealed the existence of an irreversible component attributable to the alkylation reaction with plasma proteins.
Following administration of a two-minute infusion of doses ranging from 5 to 23 mg/m2 body surface area (approximately 0.1 to 0.6 mg/kg bodyweight) to 10 patients with ovarian cancer or multiple myeloma, the mean volumes of distribution at steady state and central compartment were 29.1 ± 13.6 litres and 12.2 ± 6.5 litres, respectively.
In 28 patients with various malignancies who were given doses of between 70 and 200 mg/m2 body surface area as a 2- to 20-min infusion, the mean volumes of distribution at steady state and central compartment were, respectively, 40.2 ± 18.3 litres and 18.2 ± 11.7 litres.
Following hyperthermic (39°C) perfusion of the lower limb with melphalan at 1.75 mg/kg bodyweight in 11 patients with advanced malignant melanoma, mean volumes of distribution at steady state and central compartment were, respectively, 2.87 ± 0.8 litres and 1.01 ± 0.28 litres.
Melphalan displays limited penetration of the blood-brain barrier. Several investigators have sampled cerebrospinal fluid and found no measurable drug. Low concentrations (~10% of that in plasma) were observed in a single high-dose study in children.
Biotransformation
\*In vivo\* and \*in vitro\* data suggest that spontaneous degradation rather than enzymatic metabolism is the major determinant of the drug's half-life in man.
Elimination
In 13 patients given oral melphalan at 0.6 mg/kg bodyweight, the plasma mean terminal elimination half-life was 90 ± 57 min with 11% of the drug being recovered in the urine over 24 h.
In 8 patients given a single bolus dose of 0.5 to 0.6 mg/kg bodyweight, the composite initial and terminal half-lives were reported to be 7.7 ± 3.3 min and 108 ± 20.8 min, respectively. Following injection of melphalan, monohydroxymelphalan and dihydroxymelphalan were detected in the patients' plasma, reaching peak levels at approximately 60 min and 105 min, respectively. A similar half-life of 126 ± 6 min was seen when melphalan was added to the patients' serum \*in vitro\* (37°C), suggesting that spontaneous degradation rather than enzymic metabolism may be the major determinant of the drug's half-life in man.
Following administration of a two-minute infusion of doses ranging from 5 to 23 mg/m2 body surface area (approximately 0.1 to 0.6 mg/kg bodyweight) to 10 patients with ovarian cancer or multiple myeloma, the pooled initial and terminal half-lives were, respectively, 8.1 ± 6.6 min and 76.9 ± 40.7 min. A mean clearance of 342.7 ± 96.8 ml/min was recorded.
In 15 children and 11 adults given high-dose i.v. melphalan (140 mg/m2 body surface area) with forced diuresis, the mean initial and terminal half-lives were found to be 6.5 ± 3.6 min and 41.4 ± 16.5 min, respectively. Mean initial and terminal half-lives of 8.8 ± 6.6 min and 73.1 ± 45.9 min, respectively, were recorded in 28 patients with various malignancies who were given doses of between 70 and 200 mg/m2 body surface area as a 2- to 20-min infusion. The mean clearance was 564.6 ± 159.1 ml/min.
Following hyperthermic (39°C) perfusion of the lower limb with 1.75 mg/kg bodyweight, mean initial and terminal half-lives of 3.6 ± 1.5 min and 46.5 ± 17.2 min, respectively, were recorded in 11 patients with advanced malignant melanoma. A mean clearance of 55.0 ± 9.4 ml/min was recorded.
Special Patient Populations
\*Renal impairment\*
Melphalan clearance may be decreased in renal impairment (see section 4.2 and 4.4).
\*Elderly\*
No correlation has been shown between age and melphalan clearance or with melphalan terminal elimination half-life (see section 4.2).5.3 Preclinical safety data
Fertility Studies
In mice, melphalan administered intraperitoneally at a dose of 7.5 mg/kg, showed reproductive effects attributable to cytotoxicity in specific male germ cell stages and induced dominant lethal mutations and heritable translocations in post-meiotic germ cells, particularly in mid to late stage spermatids.
A study was performed to measure the total reproductive capacity of melphalan in female mice. Females received a single intraperitoneal dose of 7.5 mg/kg melphalan and were then housed with an untreated male for most of their reproductive life span (a minimum of 347 days post-treatment). A pronounced reduction in litter size occurred within the first post-treatment interval, followed by an almost complete recovery. Thereafter, a gradual decline in litter size occurred. This was simultaneous with a reduction in the proportion of productive females, a finding associated with an induced reduction in the number of small follicles (see section 4.6).
## Pharmaceutical Particulars
6.1 List of excipients
| | |
| --- | --- |
| Hydrochloric Acid Povidone K12 Water for Injections | Ph.Eur. Ph.Eur. BP |
The solvent for solution contains sodium citrate, propylene glycol and ethanol.6.2 Incompatibilities
None known.6.3 Shelf life
36 months.6.4 Special precautions for storage
Store below 30°C
Protect from light
Do not refrigerate.
Keep out of the sight and reach of children.6.5 Nature and contents of container
Clear, neutral glass vial and bromobutyl rubber stopper with an aluminium collar.
Pack size: 50 mg6.6 Special precautions for disposal and other handling
Preparation of Melphalan Injection Solution:
Melphalan Injection should be prepared at room temperature (approximately 25°C), by reconstituting the freeze-dried powder with the solvent-diluent provided.
It is important that both the freeze-dried powder and the solvent provided are at room temperature before starting reconstitution. Warming the diluent in the hand may aid reconstitution. If the solvent-diluent is used at cold temperature, mephalan powder may not reconstitute properly and undissolved particles may be observed.
10 ml of the vehicle should be added quickly, as a single quantity into the vial containing the freeze dried powder, and immediately shaken vigorously (for at least 50 seconds) until a clear solution, without visible particles, is obtained. Each vial must be reconstituted individually in this manner. Slow diluents addition and delaying the shaking may lead to the formation of insoluble particles. It should be also noticed that the shaking process creates a considerable amount of very small air bubbles. These bubbles may persist and may take further 2 or 3 minutes to clear, as the resulting solution is quite viscous. This could make difficult the evaluation on solution clearness.
The resulting solution contains the equivalent of 5 mg per ml anhydrous melphalan and has a pH of approximately 6.5.
Melphalan Injection solution has limited stability and should be prepared immediately before use. Any solution unused after one hour should be discarded according to standard guidelines for handling and disposal of cytotoxic drugs.
The reconstituted solution should not be refrigerated as this will cause precipitation.
