跳至主要内容
临床试验/NCT06255522
NCT06255522招募中不适用

Clinical and Anatomical Factors Influencing Accuracy in Fully Guided Implant Placement

Universitat Internacional de Catalunya2 个研究点 分布在 1 个国家目标入组 98 人开始时间: 2024年3月1日最近更新:
适应症

试验速览

阶段
不适用
状态
招募中
入组人数
98
试验地点
2
主要终点
Accuracy of fully guided implant placement

研究概览

简要总结

The importance of the stability of hard and soft tissues has been shown to be of paramount importance for long-term implant success. To reach optimal functional and aesthetic outcomes, implant placement must be planned accordingly to prosthetic needs and design. Prosthetically driven implant placement is based on a diagnostic prosthetic set-up that is followed by precise implant planification and placement using CBCT and intraoral scanning.

The aim of this research is to evaluate how the clinical and anatomical factors can influence the 3D position of guided surgery.

详细描述

After assessing the fulfillment of the inclusion criteria, pre-operative cone beam computed tomography (CBCT) (Newtom, Cefla S.C.) and intraoral digital impressions (Trios®, 3Shape Dental Systems, Denmark) will be obtained for each patient to achieve a digital wax-up and a presurgical plan for the exact position of the implants by a single calibrated operator (RP).

Every patient could have a maximum of four implants to be placed (one per quadrant), in those cases, each implant will be placed with its own surgical guide.

The digital imaging and communications in medicine (DICOM) files will be imported to a guided-surgery planning software (Codiagnostix, Dental wings) to perform an implant planning based on the digital wax up; in this step the assessment of the mucosal thickness will be performed using the STL and the DICOM files superimposed. The measurement will be taken from the crestal bone until the soft tissue surface (mm).

Furthermore, a surgical guide will be designed, and 3D printed (SprintRay Pro S; SprintRay Inc) with implant guide resin (SprintRay EU Surgical Guide Clear; SprintRay Inc) by RP for the surgical procedure, supported by the whole dental arch, and reinforced with one bar across the arch.

Through guided surgery, previously planned and designed based on CBCT study and CAD/CAM scanning, placement of Conelog Progressive line implants (Biohorizons Camlog, Iberia) will be performed in maxilla or mandibula in a one stage surgery by a 8 years' experience operator (GB).

研究设计

研究类型
Interventional
分配方式
Na
干预模型
Single Group
主要目的
Other
盲法
None

入排标准

年龄范围
25 Years 至 60 Years(Adult)
性别
All
接受健康志愿者

入选标准

  • Patients between 25 to 60 years old.
  • Periodontally stable patients. Adequate oral hygiene with less than 15% Full Mouth Plaque Score (FMPS).
  • Patients who need dental implant treatment without simultaneous regeneration.
  • Ability to follow instructions and availability to attend for regular compliance during the entire study.
  • With presence of partial edentulism (at least 6 remaining teeth distributed in the dental arch to support the guide).

排除标准

  • Active infections
  • Untreated periodontal disease
  • Heavy smokers (>10 cigarettes per day)
  • Drug / Alcohol dependency
  • Medical condition contraindicating implants dependency
  • Patients under bisphosphonate therapy
  • Limited mouth opening
  • Edentulous patients or with les than 6 teeth.

结局指标

主要结局

Accuracy of fully guided implant placement

时间窗: Baseline

Both CBCT will be aligned (pre-op scan and post-op scan) to make calculations by a single evaluator (AB) included the following: (1) angle: angle deviation measured in degrees; (2) base: deviation at implant shoulder in millimeters; (3) tip: deviation at implant apex in millimeters; (4) 3D offset: global deviation in 3D directions in millimeters; (5) mesiodistal deviation in millimeters: (+) deviated to the distal direction and (-) deviated to the mesial direction; (6) buccolingual deviation in millimeters: direction: (+) deviated to lingual direction and (-) deviated to buccal direction; and (7) apicocoronally deviation in millimeters: direction: ( +) deviated in the apical direction. and (-) deviated in the coronal direction.

次要结局

未报告次要终点

研究者

申办方类型
Other
责任方
Principal Investigator
主要研究者

Gonzalo Blasi

Clinical Professor

Universitat Internacional de Catalunya

研究点 (2)

Loading locations...

相似试验