Intermittent Positive-Pressure Breathing Effects in Patients With High Spinal Cord Injury

Patients The local ethics committee approved the study, and all patients have to give their written informed consent prior to inclusion. To be included patients had to satisfy the following criteria: (a) American Spinal Injury Association (ASIA) Class A or B10 SCI caused by trauma within the last 6 months and located between C5 and T6, (b) no thoracic injury, (c) and admission to a rehabilitation unit. The study was conducted over the first 4 months in the rehabilitation unit.

Measurements All tests will be performed with the patients seated in their wheelchairs. Lung function was tested using a Vmax 229 Sensormedics System (Yorba Linda, CA) according to standard guidelines.11 Arterial blood gas levels will be measured in capillary blood immediately after sampling from the radial artery with local anesthesia (topical lidocaine prilocaine, Emla®, Astra, Westborough, ME), using a Radiometer ABL 330 analyzer (Tacussel Radiometer Analytical, Copenhagen, Denmark). Flow will be measured using a Fleisch #2 pneumotachograph (Lausanne, Switzerland) and esophageal pressure (Pes) using a catheter-mounted pressure transducer system (Gaeltec, Dunvegan, UK). Appropriate placement will be verified by the occlusion test.12

Data Analysis Respiratory parameters will bemeasured during the last 5 minutes of a 20-minute period of relaxed breathing. From the flow tracings, we will measure inspiratory time (TI) and respiratory frequency (fR). Tidal volume (VT) will be obtained from the integrated flow signal. Dynamic lung compliance (CLdyn) will be calculated as the ratio of VT over the Pes difference at the points of zero flow corresponding to the start and end of inspiration.13 Inspiratory WOB (joule/min) will be calculated from a Campbell diagram by computing the area enclosed between the inspiratory Pes-VT curve and the theoretical static pressure-volume curve of the chest wall, as previously described.14 In addition, WOB will be partitioned into its elastic (WOBel) and resistive (WOBres) components on either side of the line joining the two zero-flow points.

Study protocol All patients will be studied during 2 months with and 2 months without IPPB, in random order. IPPB treatment will consist in at least 20 minutes of IPPB twice a day and 5 days a week. The patient will be comfortably seated with the back of the chair inclined at 45°. Inspiratory pressure will increase gradually to either the highest tolerated value or 40 cm H2O. Respiratory rate, inspiratory flow (from 20 to 60 L/min), and end-inspiratory trigger will be set to maximize patient comfort. The patients chose between a mouthpiece (Bird, Palm Springs, CA) and a nasal mask (Respironics, Herrsching, Germany). During both of the 2-month treatment periods, the number of patients who will require physiotherapy to clear excess secretions and the number of physiotherapy sessions per patient will be recorded.

Lung function tests will be performed at inclusion and at the end of each 2-month period in all patients. In addition, patients will be asked whether they will agree to measurements of flow, Pes, and gastric pressure at inclusion and at the end of each period. Measurements at the end of the IPPB period will be performed twice, immediately before and immediately after 20 minutes of IPPB with the catheter-mounted pressure-transducer system still in place. Each measurement period wil last about 5 minutes.