AI Searches 100 Million Possibilities to Democratize 3D Printing of NASA's GRCop-42 Alloy

Washington State University查看公司主页 researchers have harnessed artificial intelligence to find a more efficient and less expensive way to 3D-print GRCop-42 (搜索)搜索该药品, a high-performance metal alloy developed by NASA查看公司主页 for extreme-heat aerospace applications. The advance could eventually allow the alloy—widely used in aerospace systems such as liquid rocket engine combustion chambers—to be printed on common commercial equipment, and the AI strategy itself may prove useful for other scientific problems involving enormous numbers of possible experiments, including drug discovery.

The research team, from WSU's School of Electrical Engineering and Computer Science and the School of Mechanical and Materials Engineering, published the work in the Proceedings of the AAAI Conference on Artificial Intelligence and received the Innovative Deployed Application Award at the organization's annual conference.

"Ninety percent of commercial printers cannot print this metal alloy, so given that we were able to find these feasible process parameters, it allows us to use those commercial printers, and we are essentially democratizing the printing of this alloy," said Jana Doppa, Huie-Rogers Endowed Chair Professor of Computer Science and Berry Distinguished Professor in Engineering, who led the research.

A NASA Alloy Built for Extreme Heat

GRCop-42 (搜索)搜索该药品 is an alloy composed of copper, chromium, and niobium. NASA查看公司主页 developed it for demanding environments where both heat resistance and efficient heat transfer are essential. Because the material maintains high thermal conductivity and strength at extreme temperatures, it is used in aerospace systems, including liquid rocket engine combustion chambers.

Despite its desirable properties and broader potential, the alloy is difficult and costly to 3D print because the process typically requires substantial laser power and energy. Previous attempts to print GRCop-42 (搜索)搜索该药品 using the lower wattages available on more common commercial machines had not succeeded. Testing possible printing settings one by one is also impractical: each attempt consumes expensive material, requires specialized equipment, and takes considerable human effort. A single print can cost hundreds of dollars, and thoroughly analyzing the finished sample can require several days.

"Sometimes they printed a certain configuration, and the product just melted," said Azza Fadhel, first author of the paper and a PhD student in computer science. "It wasn't really printable, and even with time and money, they wouldn't be able to try all 100 million options. What we were doing in our collaboration is to apply the AI so that we efficiently choose candidates from this very large search space."

AI Searches More Than 100 Million Possibilities

The researchers began with data from 37 printing configurations that had already failed in earlier experiments conducted in the School of Mechanical and Materials Engineering. Using those results, they developed a method that could estimate how likely an untested combination of settings was to produce a successful print. The AI model then recommended small groups of new configurations to test.

Its selections balanced two priorities: some experiments focused on configurations that appeared especially promising, while others explored less certain parts of the search space that could provide new information and improve the model. Nathaniel Zuckschwerdt, Susmita Bose, and Amit Bandyopadhyay in the School of Mechanical and Materials Engineering worked with the team to print GRCop-42 (搜索)搜索该药品 using the configurations chosen by the AI and then evaluate the finished samples. Aryan Deshwal from the University of Minnesota also collaborated on the project.

"They would give me back the results, and I liked all of them—even if they failed—because every result improved our AI model," said Fadhel.

Lower Power Could Expand Access

Successfully printing the alloy with less laser power could bring several advantages, including reduced energy consumption, decreased wear on printing equipment, and lower costs associated with processing samples after printing. It could also make GRCop-42 (搜索)搜索该药品 available to universities, smaller laboratories, and companies that do not have access to specialized high-power printing systems.

The difficulty was that researchers already knew successful settings would be extremely rare among the more than 100 million possible configurations. "It's a very challenging case for AI," said Doppa. "Every time you try, you basically get a binary success or failure signal, and you are trying to minimize the number of tries that you have so that you get to those successful needles very quickly."

Despite those odds, the team found six successful configurations at different laser power levels during three months of work, while limiting the project to a total of just 40 experiments. For the first time, they successfully printed GRCop-42 (搜索)搜索该药品 using 500 watts of laser power.

A Broader Tool for Scientific Discovery

The researchers say the same AI-guided approach could be adapted to identify workable processing conditions for other metal alloys and additive manufacturing systems. More broadly, the method could help scientists tackle problems in which successful results are uncommon, the number of possible experiments is enormous, and testing every option would be prohibitively expensive. The researchers see potential applications beyond manufacturing, including other areas of scientific discovery where each experiment carries significant material, financial, or time costs—such as drug discovery.

"There's always uncertainty when you are deploying something where real people, materials, and physical costs are involved," said Doppa. "We didn't know whether we would succeed or not, and there is always that risk. There are real stakes. I was very surprised that we were able to do this so well."