跳至主要内容
临床试验/NCT06390033
NCT06390033已完成不适用

Biomechanical Study of Different Prostheses for Unilateral Transtibial Amputees During Indoor and Outdoor Activities

The Hong Kong Polytechnic University1 个研究点 分布在 1 个国家目标入组 6 人开始时间: 2023年6月30日最近更新:
适应症

试验速览

阶段
不适用
状态
已完成
入组人数
6
试验地点
1
主要终点
Basic mobility function with two prostheses by Berg Balance Test

研究概览

简要总结

The goal of this observational study is to evaluate and compare the performance of two prosthetic feet for unilateral transtibial amputees during both indoor and outdoor activities. The main research questions aim to answer are:

  1. Can a low-cost prosthetic foot enhance gait mechanics and physical performance in individuals who have undergone traumatic unilateral transtibial amputation, as compared to the traditional K2 - K3 prosthetic feet currently available on the market, during both indoor and outdoor activities?
  2. Can the low-cost prosthetic foot meet user satisfaction levels after traumatic unilateral transtibial amputation, when compared to the traditional K2 - K3 prosthetic foot on the market?

Participants will be asked to do

  1. Prior to the commencement of the experiment, a professional prosthetist and orthotist will conduct all fitting and alignment procedures for the transtibial amputees. Participants will then be given a two to three-week period to train and acclimate to the individual socket alignment and prosthetic foot.
  2. Participants are asked to refrain from consuming caffeine or any stimulants for 24 hours before the tests.
  3. Participants will be required to perform the Berg Balance Test.
  4. Participants will undergo a series of clinical tests, including: 1) Time to Go Up (measured in seconds), 2) Four Square Step Test (measured in seconds), 3) 10-Meter Walk Test (measured in seconds), 4) Eye Close Standing, 5) Tandem Test, and 6) Functional Reach Test. Each test will be conducted three times. The test items of 4) and 5) will be performed on a force plate (Bertect, Ohio, USA) with dimensions of 400 x 600 mm and a capturing frequency of 1,000 Hz.
  5. Participants will be asked to walk on a force plate (AMTI, Advanced Mechanical Technology, Inc., Watertown, USA) at a fixed walking speed of 1.11 ± 0.11m/s, allowing the foot to land naturally on the force plate. Five trials of the gait cycle with a clean foot will be used for analysis.
  6. Participants will perform the Counter Movement Jump Test three times with maximum effort on the force plate (Bertect, Ohio, USA), which will be performed without a hand swing.
  7. Participants will be asked to perform a 2-minute walking test on flat concrete ground, stairs, and a ramp, respectively.
  8. Finally, participants will be asked to complete the Locomotion Capabilities Index questionnaire.

详细描述

Thirty-nine passive-reflective markers of 14 mm in diameter were placed on the participant (Figure 1) according to the landmarks set of the plug-in full body model. An 8-camera motion capturing system (VICON, Nexus 2.0 Inc., Oxford, UK) and 2 force plates (AMTI, Advanced Mechanical Technology, Inc., Watertown, USA) mounted under the walkway were utilized for gait analysis and recorded 100 frames per second simultaneously. All the systems were calibrated before the experiment.

研究设计

研究类型
Observational
观察模型
Case Control
时间视角
Cross Sectional

入排标准

年龄范围
36 Years 至 64 Years(Adult)
性别
All
接受健康志愿者

入选标准

  • unilateral transtibial amputees,
  • with more than 12 months of experience using a prosthesis,
  • with a K2 prosthesis or above,
  • be able to walk continuously unaided with the prosthetic foot for at least 20 minutes.

排除标准

  • with a short or an injured residual limb,
  • pregnant,
  • any neurological or musculoskeletal diseases,
  • have a record of active endocarditis and acute myocarditis/pericarditis,
  • experience ongoing unstable angina,
  • have uncontrolled cardiac arrhythmia with hemodynamic compromise,
  • have had a recent stroke or transient ischemic attack,
  • have high blood pressure, etc.

结局指标

主要结局

Basic mobility function with two prostheses by Berg Balance Test

时间窗: up to 12 weeks

Participants will be invited to visit the laboratory twice to participate in two prostheses will be compared by conducting Berg Balance Test including 14 items, each item is graded using a 5-point ordinal scale ranging from 0 to 4. 0-20 indicates high fall risk, 21-40 indicates medium fall risk, 41-56 indicates low fall risk.

Basic mobility function with two prostheses by Time to Go Up

时间窗: up to 12 weeks

Participants will be invited to visit the laboratory twice to participate in two prostheses will be compared by conducting Time to Go Up (seconds), including stand up from chair, walk 3 meters, turn around and back, then sit. Longer than 13.5 seconds indicates high risk of fall.

Basic mobility function with two prostheses by Four Square Step Test

时间窗: up to 12 weeks

Participants will be invited to visit the laboratory twice to participate in two prostheses will be compared by conducting Four Square Step Test (seconds).

Basic mobility function with two prostheses by 10-meter Walk Test

时间窗: up to 12 weeks

Participants will be invited to visit the laboratory twice to participate in two prostheses will be compared by conducting 10-Meter Walk Test (m/s).

Stability index with two prostheses by Eye Close Standing

时间窗: up to 12 weeks

Participants will be invited to the laboratory twice to participate in an experiment. In each session, they will be required to perform the Eye Close Standing on a force plate (Bertect, Ohio, USA). The test will be conducted three times, with each attempt lasting 30 seconds. Participants will perform the task using either a low-cost prosthesis or their own prosthetic foot. The averaged anterior-posterior stability index (mm), and medial-lateral stability index (mm) will be calculated automatically by Noraxon software for each task to assess the ability of maintaining posture stability with two prostheses.

Stability index with two prostheses by Tandem Test

时间窗: up to 12 weeks

Participants will be invited to the laboratory twice to participate in an experiment. In each session, they will be required to perform the Tandem Test on a force plate (Bertect, Ohio, USA). The test will be conducted three times, with each attempt lasting 30 seconds. Participants will perform the task using either a low-cost prosthesis or their own prosthetic foot. The averaged anterior-posterior stability index (mm), and medial-lateral stability index (mm) will be calculated automatically by Noraxon software for each task to assess the ability of maintaining posture stability with two prostheses.

Jump feasibility with two prostheses

时间窗: up to 12 weeks

Participants will be invited to visit the laboratory twice to participate in an experiment. During each visit, they will be asked to perform the countermovement jump on the force plate (Bertect, Ohio, USA) for three times, using either a low-cost prosthesis or their own prosthetic foot. The average of three times jump height, vertical ground reaction force during different jump phases with two different prostheses will be compared.

Functional Reach Test

时间窗: up to 12 weeks

Participants will move from the vertical standing position to the maximum lean forward position, with the feet firmly placed on the floor with either prosthetic foot for three times. The averaged distance (cm) with two prostheses will be compared.

Subjective evaluation by Locomotion Capabilities Index questionnaire

时间窗: up to 12 weeks

Participants will be asked to complete the Locomotion Capabilities Index questionnaire including 14 items, each item is rated with a 5-level scale. 0 indicates unable to perform, 4 indicates no difficulty.

Gait analysis with two prostheses

时间窗: up to 12 weeks

For collecting the kinematic and kinetic data for gait analysis, thirty-nine passive-reflective markers were placed on the participant according to the landmarks set of the plug-in full body model. An 8-camera motion capturing system (VICON, Nexus 2.0 Inc., Oxford, UK) and 2 force plates (AMTI, Advanced Mechanical Technology, Inc., Watertown, USA) mounted under the walkway were recorded 100 frames per second simultaneously. All the systems were calibrated before the experiment. Participants will be asked to walk on a force plate (AMTI, Advanced Mechanical Technology, Inc., Watertown, USA) at a fixed walking speed of 1.11 ± 0.11m/s, allowing the foot to land naturally on the force plate. Five trials of the gait cycle with a clean foot will be used for analysis.

次要结局

未报告次要终点

研究者

申办方类型
Other
责任方
Principal Investigator
主要研究者

YICK Kit Lun

Professor

The Hong Kong Polytechnic University

研究点 (1)

Loading locations...

相似试验

Biomechanical Study of Different Prostheses for... | 临床试验