Implementation of the Dart-throwing Motion Plane in Hand Therapy After Distal Radius Fractures
- Conditions
- Distal Radius Fracture
- Interventions
- Device: Dart splint orthosisOther: Conventional treatment
- Registration Number
- NCT03918174
- Lead Sponsor
- Sheba Medical Center
- Brief Summary
Rehabilitation following wrist fractures often includes exercising flexion-extension. However, during daily functions, our wrist moves through an oblique plane, named the Dart Throwing Motion (DTM) plane. This plane might be a more stable plane in cases of wrist injuries, since the proximal carpal row remains relatively immobile. However, rehabilitation programs that incorporate exercising in the DTM plane have yet to be explored.
The researchers aimed to evaluate the rehabilitation outcomes following treatment in the DTM plane compared with outcomes following treatment in the sagittal plane after Distal Radius Fracture (DRFs).
Twenty four subjects following internal fixation of DRFs were randomly assigned into a research group . The range of motion, pain levels and functional tests were measured before and after an intervention of 12 treatment sessions. The control group activated the wrist in the sagittal plane while the research group activated the wrist in the DTM plane, via a DTM orthosis.
- Detailed Description
Twenty four subjects were recruited after Open Reduction Internal Fixation (ORIF) of DRFs. Inclusion criteria were: individuals aged 18 to 65 years. Individuals with previous orthopedic or neurological impairments of the upper limb or a cognitive impairment were excluded from the study. Subjects were enrolled from the department of hand surgery at the Sheba medical center.
Each subject read and signed an informed consent form pretrial. Each subject went through an intake session documenting personal information, upper limb ROM, pain levels and functional tests recorded by a certified occupational therapist (OT), hand therapist. The Sagittal group activated the wrist mostly in the sagittal plane while the research group activated the wrist also in the DTM plane, via the Modified Dart Splint (MDS).
All of the subjects in both groups received 12 therapy sessions, 30 minutes each one, 2-3 times a week, during 6-8 weeks following the removal of the cast. Certified hand therapists used several different treatment techniques during the sessions, to achieve the primary goals of edema control, increased Range of Motion (ROM), and decreased stiffness. Compressive wrap with retrograde massage, scar management, soft-tissue mobilization, joint mobilization, active motion and ROM exercises were practice patterns used in this study for all subjects, regardless their group. Both groups were instructed to exercise at home, 3 times a day, 10 minutes per exercise session. The MDS was fitted to the subjects in the DTM group on their first evaluation session. They received oral and written instructions regarding the donning and manner of exercise. Specifically, they were instructed to use the MDS at home. For each 10-minute exercise session, they were asked to perform 5 minutes of radial-extension under resistance and then 5 minutes ulnar-flexion under resistance. In addition, this group was required to fill in a chart at the end of each practice session (morning, noon and evening), throughout the intervention period. The researcher performed weekly phone calls to remind the DTM group to fill these out. The Sagittal group was instructed to perform at home active wrist motion similar to that practiced during the supervised therapy sessions. The prescribed instructions were similar to the exercises performed during the sessions.
At the completion of the treatment, the subjects were reexamined by the same evaluator that performed the baseline evaluation.
Recruitment & Eligibility
- Status
- COMPLETED
- Sex
- All
- Target Recruitment
- 24
- 18 to 65 years old
- Went through open reduction internal fixation of distal radius fracture.
- Individuals with previous orthopedic impairments of the upper limb.
- Individuals with neurological impairments of the upper limb.
- Individuals with a cognitive impairment.
Study & Design
- Study Type
- INTERVENTIONAL
- Study Design
- PARALLEL
- Arm && Interventions
Group Intervention Description Dart Splint orthosis Dart splint orthosis The Dart-Splint orthosis allows oblique wrist motion along the Dart Throwing Motion (DTM) plane, thus inhibiting movement of the healing structures following surgery around the distal radius. This is a hinged orthosis that permits selective midcarpal mobilization along the plane of the DTM is a novel orthotic device that was developed in order to facilitate protected midcarpal motion. The conventional treatment Conventional treatment The control group activated the wrist mostly in the sagittal plane. This group was instructed to perform at home active wrist motion similar to that practiced during the supervised therapy sessions. The prescribed instructions were similar to the exercises performed during the sessions.
- Primary Outcome Measures
Name Time Method A personal questionnaire baseline 6 questions regarding personal information (age, sex, family status, profession, hand dominance, and injured hand).
Change in the forearm and wrist range of motion Change from baseline forearm and wrist range of motion at two months The elbow and wrist active range of motions were measured during pro-supination, flexion-extension, radio-ulnar deviation. Additionally, the DTM plane angle of the wrist was measured according to Bugden's (Bugden, B. (2013). A proposed method of goniometric measurement of the dart-throwers motion. Journal of Hand Therapy, 26(1), 77-80. https://doi.org/10.1016/j.jht.2012.08.003)
Change in hand function on The Jebsen-Taylor Hand Function Test (JHFT) Change from baseline hand function at two months The Jebsen-Taylor Hand Function Test (JHFT) was carried out to assess fine motor skills, weighted and non-weighted hand function activities during performance of ADLs and the effectiveness of treatment for hand conditions. Seven subsets of the test represent a broad spectrum of hand function, which includes writing, turning over 3x5 inch cards (to simulate page turning), picking up small common objects, simulated feeding, stacking checkers, picking up large light objects, and picking up large heavy objects. To evaluate patient performance, each subset is timed and can be compared to the established norms
A house hold work and sport activity questionnaire baseline 10 questions regarding house hold activities (heavy housing and light housing) and sport activities (athletics, spinning, cycling, ball, racket, weights, swimming) were ranked on a Likert scale from 1-4 according to the daily, weekly or monthly amount of time put in to them.
Change in reported pain and function on The Patient-Rated Wrist Evaluation (PRWE) questionnaire. Change from baseline pain and function at two months The PRWE is a 15-item questionnaire designed to measure wrist pain and disability in ADL (activities of daily living).
The PRWE allows patients to rate their levels of wrist pain and disability from 0 to 10, and consists of 2 subscales:
Pain subscale: contains 5 items each of which is further rated from 1-10. The maximum score in this section is 50 and minimum 0.
Function subscale: contains total 10 items which are further divided into 2 sections i.e specific activities (having 6 items) and usual activities (having 4 items). The maximum score in this section is 50 and minimum 0.Grip strength Following the intervention at two months The Jamar hand dynamometer was used to measure grip strength. Grip strength was measured with the elbow flexed at 90° and the forearm in neutral rotation. A single measure of grip strength was performed during assessment. The second handle position of the dynamometer was used throughout testing.
Quebec User Evaluation of Satisfaction with assistive Technology (QUEST) questionnaire Following the intervention at two months The Quebec User Evaluation of Satisfaction with assistive Technology (QUEST) questionnaire, measured the level of satisfaction attributed to assistive technologies, i.e., the DTM orthosis (for the research group only). This questionnaire contained 27 variables which were scored in terms of perceived importance and satisfaction.
Pinch strength Following the intervention at two months The B\&L engineering pinch gauge pinch meter was used to measure the three pinch strength outcomes: Lateral pinch, Tripod pinch and tip to tip pinch.
Satisfaction from the self-training Following the intervention at two months Satisfaction from the self-training home exercises was rated using a 5-point Likert scale (1- Not satisfied to 5- Extremely satisfied) for 10 statements re self-training home exercises.
- Secondary Outcome Measures
Name Time Method