Comparison of Scanning With and Without Rubber Dam for Overlay Restorations
试验速览
- 阶段
- 不适用
- 状态
- 已完成
- 入组人数
- 30
- 试验地点
- 2
- 主要终点
- overall result of final crown
研究概览
简要总结
The use of rubber dam when performing adhesive restorations improves the quality of the treatment. The widespread use of this type of restorations makes it increasingly necessary to use this type of isolation of the operative field. At the same time, the use of CAD/CAM systems in dentistry has recently become more widespread, which means that chairside systems are being used more and more frequently. Given that in indirect restorations it is necessary to place the rubber dam at the time of cementation, it has been proposed to take optical impressions of the preparation with the rubber dam already in place. For this it is necessary to have previous records that are cut out and rescanned. Since there are authors who have described that rescanning can cause defects in the meshes, in this work we try to compare both types of scanning in a specific type of restorations, the overlays. For this purpose, scans of the tooth preparation with and without rubber dam are taken, and a random decision is made on the basis of which scan the restoration is made. Then it is taken to the mouth and the marginal fit, contact points and occlusion of the restoration are evaluated. The results of the group made from the scan without dam are compared with those of the group made from the scan with dam. The two scans of each case are also compared to evaluate the differences.
详细描述
- Introduction: The use of rubber dam in restorative dentistry is important in order to improve the quality of restorations. The incorporation of CAD/CAD systems has led to an increase in the use of chairside techniques. In this work we intend to study in vivo to what extent the optical impressions obtained with rubber dam are equivalent to those taken without rubber dam. For better standardization, overlay restorations are studied.
- Aims: To compare overlay restorations obtained from a scan with rubber dam placed versus restorations of the same type obtained with a scan without rubber dam.
- Material and methods:
(a) Number of patients to be treated: 30. b) Number of visits per patient: 1 c) Brief description of the different techniques used in the study, authorized and validated in the literature (3-5 lines). The use of overlay restorations is widely validated in the literature. In the digital era, rubber dam and non-rubber dam impressions are described in the literature and are used interchangeably. As there is no clinical evidence that both techniques have the same clinical efficacy, we decided to perform this in vivo comparison study.
d) Benefits and harms for the patient of participating in the study (3-5 lines). Participation in the study does not involve any harm to the patient. It is all performed in the same working time, with identical materials and identical clinical technique. It does not bring any particular benefit to the patient. It is explained to the patient that his/her participation contributes to the improvement of scientific knowledge without physical, economic or material cost.
e) Alternative treatment in case the patient does not wish to participate in the clinical study (3-5 lines). The same treatment is given whether the patient participates or not. The patient is informed that an overlay is required, the possible complications of this treatment are explained to him/her, and if he/she accepts, he/she is asked if he/she would object to participate in the study. Participation involves consenting to the analysis of the scans and the final evaluation of the restoration.
f) Treatment to be carried out in the event of complications arising in the patient, once the clinical study has begun (3-5 lines). The clinical study is performed in a single visit and is independent of possible complications of the restoration or the tooth.
研究设计
- 研究类型
- Interventional
- 分配方式
- Randomized
- 干预模型
- Parallel
- 主要目的
- Treatment
- 盲法
- Single (Investigator)
盲法说明
The caree provider takes two impressions and the investigator selects one of them for crown manufacturing.
入排标准
- 年龄范围
- 18 Years 至 —（Adult, Older Adult）
- 性别
- All
- 接受健康志愿者
- 否
入选标准
- •Need of an overlay restoration
排除标准
- •No need of overlay restoration
结局指标
主要结局
overall result of final crown
时间窗: One day
The final crown is judged by the care provider. A 10 cm Visual analogue scale (VAS) is used. 0 (unacceptable) is placed in left end, and 10 (perfect) is placed in the right end.
Marginal fit of final crown
时间窗: One day
Marginal fit will be assessed with an exploratory probe under x3.50 magnification, observing the existence of marginal fit in mesial, distal, buccal, and lingual surfaces. The probe used will be a #23/6 explorer which measures 0.22 mm at 1 mm from the tip. A score of 0 (no perception of the gap when probing), 1 (tip of the probe slightly entered the gap), and 2 (the tip clearly entered the gap) will be used
Contact points fit
时间窗: One day
Interproximal contact points will be assessed with waxed dental floss. A score of 0 (incorrect contact point), 1 (correct contact point) will be used
Occlusal adjustment
时间窗: One day
Occlusal contacts will be verified with Bausch Arti-Check Micro-Thin 40μ articulating paper and Arti-Fol Metallic Shimstock-Film 12 μ. A score of 0 (no occlusal contacts), 1 (correct occlusal contacts) and 2 (too high occlusal contacts) will be used.
次要结局
未报告次要终点
研究者
Miguel Roig Cayón
Professor
Universitat Internacional de Catalunya