Parameters in Fractional Laser Assisted Delivery of Topical Anesthetics: Role of Laser Type and Laser Settings
试验速览
- 阶段
- 4 期
- 状态
- 已完成
- 发起方
- 入组人数
- 15
- 试验地点
- 1
- 主要终点
- Pain score
研究概览
简要总结
The purpose of this study is to compare the effect of pretreatment with two different ablative laser modalities, a CO2 laser and an Er:YAG laser, and to assess the role of laser density in fractional laser assisted topical anesthesia.
详细描述
Rationale: In dermatology anesthetics are frequently injected or topically applied to achieve local anesthesia. Injectable anesthetics are effective but uncomfortable during administration, especially for people who are needle phobic. Application of topical anesthesia is painless but time consuming and often only partial aesthesia is achieved due to the barrier function of the stratum corneum. (Manuskiatti, Triwongwaranat et al. 2010) Penetration of local anesthetics could be enhanced by pretreatment of the skin with ablative fractional lasers (AFXL) which locally disrupts the stratum corneum by creating an array of microscopic ablation channels. (Sklar, Burnett et al. 2014) In a previous pilot study, conducted at our institute, we demonstrated that effective anesthesia could be achieved within ten minutes after application of a topical anesthetic on skin pretreated with AFXL at painless settings. (Meesters, Bakker et al. 2015) However, little is still known about the role of the type of fractional laser used (e.g. CO2 or Er:YAG laser), the laser settings, the type of anesthetic and the occlusion time on the efficacy of the anesthesia.
Objective
The objectives of this study are to compare the efficacy of pretreatment with two different ablative laser modalities, a CO2 laser and an Er:YAG laser, and to assess the role of laser density in fractional laser assisted topical anesthesia.
Study design: Prospective, single blinded, randomized, controlled, within subject, pilot study.
Study population: 15 healthy volunteers ≥18 years, who give written informed consent Intervention: In each subject, four test regions on subject's back of 1x1 cm will be randomly allocated to (I) pretreatment with the fractional CO2 laser at 5% density, (II) pretreatment with the fractional CO2 laser at 15% density, (III) pretreatment with the fractional Er:YAG laser at 5% density and (IV) pretreatment with the fractional Er:YAG laser at 15% density. After pretreatment, articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml 30 solution (AHES) will be applied on the test regions with 15 minutes occlusion time. After 15 minutes a pain stimulus, consisting of a pass with the fractional CO2 laser at 50 mJ and 5% density (scanned area 6x6 mm), will be given at each test region. In addition, a reference pain stimulus with the CO2 laser at the same settings will be given at unanesthetized skin. Subjects will be asked to indicate pain on a visual analogue scale (VAS) from 0-10 (0: no pain; 10: worst imaginable pain) directly after each pain stimulus.
研究设计
- 研究类型
- Interventional
- 分配方式
- Randomized
- 干预模型
- Factorial
- 主要目的
- Treatment
- 盲法
- Single (Participant)
入排标准
- 年龄范围
- 18 Years 至 —（Adult, Older Adult）
- 性别
- All
- 接受健康志愿者
- 是
入选标准
- •Fitzpatrick skin type I or II
- •Age ≥18 years
- •Patient is willing and able to give written informed consent
排除标准
- •History of keloid or hypertrophic scar formation or complicated wound healing
- •Presence of any active skin disease
- •Known allergy to local anesthesia
- •Pregnancy or lactation
- •Incompetency to understand what the procedure involves
- •Current complaints of chronic pain or other alterations in pain sensation (e.g. due to diabetes mellitus or lepra)
- •Current treatment with systemic analgesics or other medication that can influence pain sensation
- •Current treatment with anticoagulants
- •Fitzpatrick skin type III-VI
- •Excessive sun tan
研究组 & 干预措施
Fractional CO2 laser at 5% density
This test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 5% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 5% density) in a subject blinded fashion. After pretreament Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied to this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: Fractional CO2 laser, 2.5 mJ, 5% density (Device)
Fractional CO2 laser at 5% density
This test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 5% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 5% density) in a subject blinded fashion. After pretreament Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied to this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: Fractional CO2 laser, 50 mJ, 5% density (Device)
Fractional CO2 laser at 5% density
This test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 5% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 5% density) in a subject blinded fashion. After pretreament Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied to this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: AHES (Drug)
Fractional CO2 laser at 15% density
This test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreament Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied at this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: Fractional CO2 laser, 2.5 mJ, 15% density (Device)
Fractional CO2 laser at 15% density
This test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreament Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied at this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: Fractional CO2 laser, 50 mJ, 5% density (Device)
Fractional CO2 laser at 15% density
This test region will be pretreated with a fractional carbon dioxide laser with a 120 μm spot at 15% density and a pulse energy of 2.5 mJ/microbeam (Fractional CO2 laser, 2.5 mJ, 15% density) in a subject blinded fashion. After pretreament Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied at this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: AHES (Drug)
Fractional Er:YAG laser at 5% density
This test region will be pretreated with a Erbium Yttrium Aluminum Garnet laser with a 225 μm spot at 5% density and a pulse energy of 9 mJ/microbeam (Fractional Er:YAG laser, 9 mJ, 5% density) in a subject blinded fashion. After pretreatment Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied at this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: Fractional CO2 laser, 50 mJ, 5% density (Device)
Fractional Er:YAG laser at 5% density
This test region will be pretreated with a Erbium Yttrium Aluminum Garnet laser with a 225 μm spot at 5% density and a pulse energy of 9 mJ/microbeam (Fractional Er:YAG laser, 9 mJ, 5% density) in a subject blinded fashion. After pretreatment Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied at this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: AHES (Drug)
Fractional Er:YAG laser at 15% density
This test region will be pretreated with a Erbium Yttrium Aluminum Garnet laser with a 225 μm spot at 15% density and a pulse energy of 9 mJ/microbeam (Fractional Er:YAG laser, 9 mJ, 15% density) in a subject blinded fashion. After pretreatment Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied at this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: Fractional CO2 laser, 50 mJ, 5% density (Device)
Fractional Er:YAG laser at 15% density
This test region will be pretreated with a Erbium Yttrium Aluminum Garnet laser with a 225 μm spot at 15% density and a pulse energy of 9 mJ/microbeam (Fractional Er:YAG laser, 9 mJ, 15% density) in a subject blinded fashion. After pretreatment Articaine hydrochloride 40 mg/ml and epinephrine 10 μg/ml solution (AHES) will be applied at this test region. Fifteen minutes after AHES application (incubation time; under occlusion), a pain stimulus will be given at the test region with the Fractional CO2 laser, 50 mJ, 5% density.
干预措施: AHES (Drug)
结局指标
主要结局
Pain score
时间窗: After 15 minutes incubation time of the anesthetics
The main study parameter is pain, as scored on a VAS from 0-10 (0: no pain; 10: worst imaginable pain).
次要结局
- Pain score(Directly after pretreatment.)