Clinical Trial of Dvectis Pads in Comparison to no Pad Use in Patients With Chronic Lumbar Spine Pain
- Conditions
- Disease Lumbar SpineBack PainBack Disorder
- Interventions
- Other: Use of the Dvectis Single padOther: Use of the Dvectis Double padOther: Use of no pad
- Registration Number
- NCT03947580
- Lead Sponsor
- DD-Hippero s.r.o.
- Brief Summary
1. Introduction
1.1 Description of the Trial
The trial was a monocentric, open, randomized, 3-arm clinical trial that took place at the Department of Orthopaedics of the Karviná Miners' Hospital (Karvinská hornická nemocnice a.s.). The involvement of a maximum total number of 198 patients with chronic lumbar spine pain was planned; the patients were randomly and evenly assigned to one of the 3 treatment groups:
1. Use of the Dvectis Single pad;
2. Use of the Dvectis Double pad;
3. Use of no pad. One sequential interim analysis was planned in the middle of the clinical trial and after this interim analysis, the trial was stopped early due to proven efficacy.
The expected period of participation of each patient in the clinical trial was 6 weeks (± 5 days). For an overview of the individual study visits and procedures, study population and other detailed information, see the study protocol.
According to the plan, the assessment subject was asked during Visit 1 and Visit 2 about the most intensive pain felt in the last 48 hours (PI). The pain was recorded by the subject in the visual analogue scale (VAS) in CRF under supervision of the investigator. Then the assessment subject recorded the intensity of their pain independently in the Patient Journal daily.
1.2 Primary Objective, Quantity and Hypothesis
The primary objective of the clinical trial was to assess the efficacy of using the Dvectis Single pad in comparison to "use of no pad" in patients suffering from chronic lumbar spine pain.
PI was the primary quantity. The primary hypothesis was the superiority of Dvectis Single based on a check, assessed based on the difference in PI (PID) between week 2 and week 6 (PID6).
- Detailed Description
1. Analysed Populations and Number of Subjects
Prior to the statistical analysis, 4 populations were defined in line with the study protocol:
1. Population including all randomised subjects (ARS);
2. Population of all patient with intention to treat (ITT);
3. Population of patients without serious deviation from the clinical trial plan
4. Safety population.
Each analysed population was based on a list of its members. Although the treatment group could have generally been different for each patient in a different population (see the study protocol and statistical analysis plan), such a case did not occur (as all the patients were de facto placed in the group to which they were randomized). Therefore the real treatment group is the same as the randomization treatment group for all patients. This fact is not discussed further in the document.
1.1 The ARS population
Included all patients who were involved in the clinical trial and randomized. The ARS population was used for summaries of demographic quantities and other quantities established during Visit 1 in order to describe the study population.
1.2 ITT Population
In this case, this population was identical to the ARS population. According to the plan, ITT was not supposed to include those ARS patients for whom no PI data were available and those patients who entered the study repeatedly. However, such circumstances were not detected. The ITT population represented the primary analysed population for the assessment of efficacy.
1.3 PPS Population
According to the statistical plan, PPS was to include all ITT patients except for patients with a serious deviation from the clinical trial plan; a serious deviation includes:
* Failure to meet one or multiple participation criteria;
* Error in treatment allocation;
* Documented use of unauthorized concomitant medication or treatment;
* Missing PI0 value;
* More than 25% missing PI values.
* Serious treatment regimen violation or another serious deviation from the clinical trial plan.
The monitoring reports and discrepancy report implied:
* No study subject that has not met a participation criterion has been registered;
* No study subject with incorrectly allocated treatment has been identified;
* No use of unauthorized concomitant treatment has been documented;
* There was no PI0 value missing;
* Patients 45, 53 and 94 ended the study early; the number of PI values missing is over 25% (83%).
* The following patients violated the treatment regimen in terms of non-observance of the minimum time of sitting on the pad (21, 23, 35, 42, 55, 57, 60, 72, 75, 76, 84, 86, 88).
Thus there was a serious deviation from the protocol in 16 study subject, i.e. 15.7%.
The PPS population represented the secondary analyzed population for the assessment of efficacy. Its task was to demonstrate the robustness of the main clinical trial results. For this reason, comparisons of the tested group efficacy to the control group were used (in addition to ITT) in final analyses using PI in order to achieve confirmation of the main clinical trial conclusions.
1.4 Safety Population
According to the plan, the safety population should have constituted of subjects from ARS, except for those with whom all contact was lost immediately after Visit 1 and those who were placed (in reality) in one of the tested groups but were not given a pad.A pad was given to all patients in the tested groups. All contact was lost with patients 53 and 94 and they were eliminated from the safety population. Patients in the safety population were analyzed based on the treatment groups they were really placed in, regardless of what group they had been randomized to.
1.6. Overview of Analysed Populations and Patient History (Numbers of subjects in treatment groups and analysed populations)
Dvectis Dvectis No treatment Total Single Double
ARS population 35 34 33 102 ITT population 35 34 33 102 PPS population 29 25 32 86 Safety population 35 33 32 100
2 Missing Data
In the ARS population analyses, the missing data were be treated as missing according to the plan, i.e. stated in summaries as total numbers of missing data; however, they were excluded from the calculations of other statistics. In reality, only the time of sitting on the pad is of significance. In all analyses of the PI quantities, the method of imputation of the last observed value (Last Observation Carried Forward - LOCF) was used, in accordance with the plan. The plans for a situation when the PI1 would be missing were not used since the situation did not occur. The use of LOCF generally also leads to a bias but with regard to the observed decrease in the PI values during the patient's participation in the study in the tested groups, compared to the reference group, such an approach is obviously conservative. For evaluation of the Oswestry questionnaire, the use of LOCF was planned primarily at the level of individual questions as well as the use of the scoring manual procedure accounting for missing values, if any. This procedure was beyond the data administration and statistical analysis activities since the questionnaire was evaluated by the investigator, entering only the total score in the patient record sheets. If the total score was missing, it was processed similarly to the processing of missing values in the ARS population analysis (i.e. solely elimination from the analysis).
3 Sequential and Final Analysis
The first sequential analysis was performed according to the interim analysis plan and resulted in early study stopping due to efficacy. A report of the first sequential analysis results is included in a separate document. Then the final analysis was performed, which is presented in this report.
4 Characteristic of Study Subject and Treatment Regimen Compliance
For the description of the study population within the sequential interim analysis, summaries of demographic quantities were calculated and presented, as established before the start of the treatment in the scope determined by the statistical analysis plan. The summaries were presented for the respective treatment groups (for all 3 treatment groups). The significance of the differences in these characteristics was not tested.
The treatment regimen compliance was evaluated by a calculation of aggregate statistics for the average time of the device use in the course of participation in the study.
For the analyzed quantities, summary statistics were calculated in the respective treatment groups and as a total. The analyzed ARS population was used.
Recruitment & Eligibility
- Status
- COMPLETED
- Sex
- All
- Target Recruitment
- 100
Not provided
Not provided
Study & Design
- Study Type
- INTERVENTIONAL
- Study Design
- PARALLEL
- Arm && Interventions
Group Intervention Description Use of the Dvectis Single pad Use of no pad The Dvectis Single Dynamic-directional pad is a basic model of the Dvectis product range that provides full functionality based on the dynamic-directional seating principle. The Dvectis Single pad is designed to steer muscle tension during sitting in deep-seated muscles. The Dvectis Single pad is intended to eliminate chronic lumbar spine pain by strengthening the stabilizing muscles. Use of the Dvectis Single pad Use of the Dvectis Single pad The Dvectis Single Dynamic-directional pad is a basic model of the Dvectis product range that provides full functionality based on the dynamic-directional seating principle. The Dvectis Single pad is designed to steer muscle tension during sitting in deep-seated muscles. The Dvectis Single pad is intended to eliminate chronic lumbar spine pain by strengthening the stabilizing muscles. Use of the Dvectis Double pad Use of the Dvectis Double pad The Dvectis Double Dynamic-directional pad is based on the Dvectis Single model, but in addition to its dual-chamber design, it provides seating with a more balanced load and a higher dynamic-directional effect. The Dvectis Double pad is designed to create and route muscle tension during sitting in deep-seated muscles. The Dvectis Double is also suitable for soft substrates (sofa, soft chair, etc.). The Dvectis Double Pad is intended to remove chronic lumbar spine pain by strengthening the stabilizing muscles. Use of the Dvectis Double pad Use of no pad The Dvectis Double Dynamic-directional pad is based on the Dvectis Single model, but in addition to its dual-chamber design, it provides seating with a more balanced load and a higher dynamic-directional effect. The Dvectis Double pad is designed to create and route muscle tension during sitting in deep-seated muscles. The Dvectis Double is also suitable for soft substrates (sofa, soft chair, etc.). The Dvectis Double Pad is intended to remove chronic lumbar spine pain by strengthening the stabilizing muscles.
- Primary Outcome Measures
Name Time Method Change of pain intensity of using the Dvectis Single pad in comparison to "use of no pad" in patients at Visit 1 and Visit 2 6 weeks between visits Pain intensity was measured on a 100 mm Visual Analogue Scale (VAS). VAS is a graphic record where the patient indicates the intensity of pain on a 100 mm long line, where 0 mm means no pain and 100 mm means unbearable pain. The degree of pain intensity is the distance from the left end of the line to the patient indicated by the value in millimeters. The participating subject was asked for experiencing the greatest pain in the last 48 hours during the Visit 1 and Visit 2. The pain was recorded by the subject under supervision of the investigator at Visit 1 and Visit 2. Change of VAS values in mm (0-100mm) between Visit 1 and 2 was evaluated for all subjects. Finaly the overall changes of pain intensity of patients using the Dvectis Single pad in comparison to "use of no pad" were evaluated by statistician.
- Secondary Outcome Measures
Name Time Method Change of pain intensity of using the Dvectis Double pad in comparison to "use of no pad" in patients at Visit 1 and Visit 2 6 weeks between visits Pain intensity was measured on a 100 mm Visual Analogue Scale (VAS). VAS is a graphic record where the patient indicates the intensity of pain on a 100 mm long line, where 0 mm means no pain and 100 mm means unbearable pain. The degree of pain intensity is the distance from the left end of the line to the patient indicated by the value in millimeters. The participating subject was asked for experiencing the greatest pain in the last 48 hours during the Visit 1 and Visit 2. The pain was recorded by the subject under supervision of the investigator at Visit 1 and Visit 2. Change of VAS values in mm (0-100mm) between Visit 1 and 2 was evaluated for all subjects. Finaly the overall changes of pain intensity of patients using the Dvectis Double pad in comparison to "use of no pad" were evaluated by statistician.
Trial Locations
- Locations (1)
Prague Clinical Services
🇨🇿Prague, Praha 4, Czechia