Safety, Tolerability, and Pharmacokinetics of Iloperidone Depot in Schizophrenic Patients

Phase 1

Completed

Conditions: Schizophrenia

Interventions: Drug: Iloperidone crystalline formulation
Drug: Iloperidone microparticle formulation
Drug: Oral iloperidone

Registration Number: NCT01348100

Lead Sponsor: Novartis Pharmaceuticals

Brief Summary: This study is designed as a 3-part trial to evaluate the safety of a novel depot formulation of iloperidone, compare 2 depot dosage forms, and perform dose ranging of 1 chosen form in support of a monthly depot dosing regimen. In Phase A, the study is designed to evaluate the safety of a crystalline iloperidone depot formulation. In Phase B, the pharmacokinetic and safety profile of 2 depot clinical dosage forms will be compared, and 1 form will be selected for assessment in Phase C. Phase C of this study is designed to define the dose-exposure relationship of the selected form and to provide information that will permit a comparison of the risk-benefit ratio of several doses of the study drug to enable optimal dose selection for later studies.

Detailed Description: Not available

Recruitment & Eligibility

Status: COMPLETED

Sex: All

Target Recruitment: 81

Inclusion Criteria

Patients with schizophrenia that have been stable for 3 months.

Exclusion Criteria

Women who can become or are currently pregnant or lactating.
Hypersensitivity to iloperidone or related drugs.

Other protocol-defined inclusion/exclusion criteria may apply.

Study & Design

Study Type: INTERVENTIONAL

Study Design: PARALLEL

Arm && Interventions

Group	Intervention	Description
Iloperidone 125 mg crystalline formulation - Phase A	Iloperidone crystalline formulation	Participants received a crystalline formulation of iloperidone 125 mg in a depot IM injection 1 time. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 7 days to stable doses of 12 to 24 mg daily.
Iloperidone 250 mg crystalline formulation - Phase B	Iloperidone crystalline formulation	Participants received a crystalline formulation of iloperidone 250 mg in a depot IM injection 1 time. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.
Iloperidone 250 mg microparticle formulation - Phase B	Iloperidone microparticle formulation	Participants received a microparticle formulation of iloperidone 250 mg in a depot IM injection 1 time. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.
Iloperidone 250 mg microparticle formulation - Phase C	Iloperidone microparticle formulation	Participants received a microparticle formulation of iloperidone 250 mg in a depot IM injection 2 times 28 days apart. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.
Iloperidone 500 mg microparticle formulation - Phase C	Iloperidone microparticle formulation	Participants received a microparticle formulation of iloperidone 500 mg in a depot IM injection 2 times 28 days apart. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.
Iloperidone 625 mg microparticle formulation - Phase C	Iloperidone microparticle formulation	Participants received a microparticle formulation of iloperidone 625 mg in a depot IM injection 2 times 28 days apart. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.
Iloperidone 50 mg crystalline formulation - Phase A	Iloperidone crystalline formulation	Participants received a crystalline formulation of iloperidone 50 mg in a depot intramuscular (IM) injection 1 time. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 7 days to stable doses of 12 to 24 mg daily.
Iloperidone 125 mg crystalline formulation - Phase A	Oral iloperidone	Participants received a crystalline formulation of iloperidone 125 mg in a depot IM injection 1 time. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 7 days to stable doses of 12 to 24 mg daily.
Iloperidone 250 mg crystalline formulation - Phase B	Oral iloperidone	Participants received a crystalline formulation of iloperidone 250 mg in a depot IM injection 1 time. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.
Iloperidone 250 mg microparticle formulation - Phase B	Oral iloperidone	Participants received a microparticle formulation of iloperidone 250 mg in a depot IM injection 1 time. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.
Iloperidone 250 mg microparticle formulation - Phase C	Oral iloperidone	Participants received a microparticle formulation of iloperidone 250 mg in a depot IM injection 2 times 28 days apart. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.
Iloperidone 50 mg crystalline formulation - Phase A	Oral iloperidone	Participants received a crystalline formulation of iloperidone 50 mg in a depot intramuscular (IM) injection 1 time. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 7 days to stable doses of 12 to 24 mg daily.
Iloperidone 500 mg microparticle formulation - Phase C	Oral iloperidone	Participants received a microparticle formulation of iloperidone 500 mg in a depot IM injection 2 times 28 days apart. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.
Iloperidone 625 mg microparticle formulation - Phase C	Oral iloperidone	Participants received a microparticle formulation of iloperidone 625 mg in a depot IM injection 2 times 28 days apart. Prior to receiving IM iloperidone, participants were gradually titrated up with oral iloperidone for at least 10 to 14 days to stable doses of 12 to 24 mg daily.

Primary Outcome Measures

Name	Time	Method
Maximum Observed Plasma Concentration (Cmax) of Iloperidone Divided by the Average Plasma Concentration (Cav) of Iloperidone (Cmax/Cav) - Phase B	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
The Average Plasma Concentration (Cav) of Iloperidone - Phase C	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. Cav was calculated as AUC0-672h/672 h.

Secondary Outcome Measures

Name	Time	Method
Time to Reach the Maximum Plasma Concentration (Tmax) of Iloperidone - Phase B	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
Maximum Observed Plasma Concentration (Cmax) of Iloperidone - Phase B	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
Area Under the Plasma Concentration-time Curve From 0 to the Last Measurable Concentration (AUClast) of Iloperidone - Phase B	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. The area under the curve was calculated using a linear trapezoidal method.
The Average Plasma Concentration (Cav) of Iloperidone - Phase B	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. Cav was calculated as AUC0-672h/672 h.
Duration That the Concentration of Iloperidone Was Above 4 ng/mL (Teff) - Phase B	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. The duration that the concentration of iloperidone was above 4 ng/mL was calculated by linear interpolation. PK/pharmacodynamic analysis performed in other studies suggests that iloperidone plasma levels of 4 ng/mL or above provide clinical efficacy.
Time to Reach the Maximum Plasma Concentration (Tmax) of Iloperidone - Phase C	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
Maximum Observed Plasma Concentration (Cmax) of Iloperidone - Phase C	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods.
Area Under the Plasma Concentration-time Curve From 0 to the End of the Dosing Period (AUCtau) of Iloperidone - Phase B	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. The area under the curve was calculated using a linear trapezoidal method. The end of the dosing period was 672 hours (28 days).
Area Under the Plasma Concentration-time Curve From 0 to the End of the Dosing Period (AUCtau) of Iloperidone - Phase C	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. The area under the curve was calculated using a linear trapezoidal method. The end of the dosing period was 672 hours (28 days).
The Average Plasma Concentration (Cav) of Iloperidone Divided by Dose - Phase C	Pre-dose to 26 days post-dose	Blood samples for pharmacokinetic (PK) evaluation were drawn pre-dose and at 3, 6, and 12 hours on Day 1; at 0 and 12 hours on Day 2; and on Days 3, 4, 6, 8, 10, 14, 18, 22, and 26 following administration of iloperidone. Blood samples were collected after each depot injection. PK parameters were calculated from plasma concentration-time data using non-compartmental methods. Cav was calculated as AUC0-672h/672 h.