Crestal vs Lateral Sinus Lift Augmentation

Not Applicable

Completed

• Conditions: Bone Atrophy, Alveolar; Edentulous Alveolar Ridge
• Interventions: Procedure: Maxillary sinus augmentation

• Registration Number: NCT04111250
• Lead Sponsor: Hospital San Pietro Fatebenefratelli

Brief Summary

The aim of this randomised controlled trial (RCT) of split-mouth design was to compare patient preference and effectiveness of two different techniques for lifting the maxillary sinus: the crestal approach versus the lateral window approach.

Detailed Description

Each patient having bilateral edentulism in posterior maxillae was randomised to receive one partial fixed prosthesis supported by one to three implants placed either with a crestal or with lateral window sinus lift procedure.

Eligibility criteria for participants

Only healed implant sites were considered (at least 3 months after tooth extraction). The vertical bone height at the implant sites to be included had to be between 2 to 6 mm and bone thickness at least 6 mm as measured on cone-bean computed tomography (CBCT) scans.

Patients were not admitted in the study if any of the following exclusion criteria was present:

general contraindications to implant surgery subjected to irradiation in the head and neck area immunosuppressed or immunocompromised treated or under treatment with intravenous amino-bisphosphonates poor oral hygiene and motivation untreated periodontal disease uncontrolled diabetes pregnant or lactating substance abusers psychiatric problems unrealistic expectations lack of opposite occluding dentition/prosthesis in the area intended for implant placement acute or chronic infection/inflammation in the area intended for sinus augmentation/implant placement referred only for implant placement who cannot be rehabilitated and followed at the treatment centre unable to attend a 5-year post-loading follow-up. Smokers were included and patients were categorised into three groups according to what declare: i) non-smokers; ìì) moderate smokers, if smoking up to 10 cigarettes/day; iii) heavy smokers if smoking more than 10 cigarettes/day.

Patients were recruited and treated in one private practice in Tirana, Albania by two operators: Marco Tallarico who performed all surgical interventions and Erta Xhanari who performed all prosthetic and maintenance procedures.

Study Timeline

• Study Start: 2015-11-01
• Primary Completion: 2018-03-30
• Study Completion: 2019-04-02
• Study First Submitted: 2019-06-16
• Status Verified: 2019-09
• Study First Submitted QC: 2019-09-29
• Last Update Submitted: 2019-09-29
• Study First Posted: 2019-10-01
• Last Update Posted: 2019-10-01

Recruitment & Eligibility

• Status: COMPLETED
• Sex: All
• Target Recruitment: 15

Inclusion Criteria

• Partially edentulous patient
• Bilateral edentulism in posterior maxillae (premolars and molars)
• 18 years or older
• Able to understand and sign an informed consent.
• At least 3 months after tooth extraction
• Vertical bone height at the implant sites between 2 to 6 mm
• Bone thickness at least 6 mm as measured on CBCT scan

Exclusion Criteria

• general contraindications to implant surgery
• subjected to irradiation in the head and neck area
• immunosuppressed or immunocompromised
• treated or under treatment with intravenous amino-bisphosphonates
• poor oral hygiene and motivation
• untreated periodontal disease
• uncontrolled diabetes
• pregnant or lactating
• substance abusers
• psychiatric problems
• unrealistic expectations
• lack of opposite occluding dentition/prosthesis
• acute or chronic infection/inflammation
• augmentation/implant placement
• referred only for implant placement

Study & Design

• Study Type: INTERVENTIONAL
• Study Design: PARALLEL

Arm && Interventions

Group	Intervention	Description
Lateral sinus lift	Maxillary sinus augmentation	Conventional procedure. Lateral approach to the sinus was made following the conventional procedure. A window on the lateral wall of the sinus is performed according to a conventional surgical lateral approach to the sinus cavity. Graft materials is filled inside the sinus cavity. Finally, iSure implants \[Maxillent\] are placed, and flap is sutured.
Crestal sinus lift using iRasie implant	Maxillary sinus augmentation	Device: iRaise Sinus Lift implant (Maxillent, Herzliya, Israel). Procedure: crestal sinus lift augmentation. We tested crestal versus lateral approach to the sinus. Crestal approach is made by a novel device (iRaise, implant system). Lateral approach is made conventionally with gold standard procedure (lateral approach). The iRaise Sinus Lift implant is made of Titanium-6 Aluminum-4 Vanadium alloy, have a surface treated with grit blasting using an apatitic calcium phosphate media, followed by acid etching, and have an internal hexagon connection. Implants have an internal l-shape channel to allow saline and graft passage. This implants system is made to perform crestal sinus lift procedure at the same time of the implant placement using the same device. After implant site preparation and initial implant placement, the hydraulic system is connected to the implant to allow the injection of saline and then graft the material. Then, the implant, is inserted for its full length.

Primary Outcome Measures

Name	Time	Method
Prosthesis failure	Up to 5 years	Planned prosthesis which could not be placed due to implant failure(s), loss of the prosthesis secondary to implant failure(s) or a prosthesis that had to be remade for any reasons.
Patient's preference (questionnaire)	Assessed 1 week and 1 month after surgery	Answers: 1) the side treated with the crestal technique, 2) the side treated with the lateral technique, 3) none, both treatments were equally good, 4) none, both treatments were equally bad.
Implant failure	Up to 5 years	Implant mobility, removal of stable implants dictated by progressive marginal bone loss or infection, and implants fracture or any other mechanical complications rendering the implant unusable. The stability of each individual implant was measured with the removed prosthesis at abutment connection, at delivery definitive prostheses and at 1 year after loading, by tightening the implant abutment screws with a torque of 20 Ncm or by assessing the stability of individual crowns using the handles of two metallic instruments.
Complications	Up to 5 years	Any technical and biological complications

Secondary Outcome Measures

Name	Time	Method
Marginal bone loss	1 year after loading	Assessed on digital periapical radiographs taken with the paralleling technique at implant placement, prosthesis delivery and 1 year after loading using a digital apparatus (CS 2100, Carestream Dental, Rochester, NY, US). In the case of a not properly readable radiograph, the radiograph was to be taken again. Radiographs were stored in a TIFF format with a 600 dpi resolution, in a personal computer. Peri-implant marginal bone levels were measured using the DFW 2.8 software for windows (Soredex, Tuusula, Finland). The software was calibrated for every single image using the known implant diameter. The distance between marginal bone level and implant/abutment junction, was measured at both mesial and distal sides to the nearest 0.01 mm and averaged. Bone level changes at single implants was averaged at sinus level and then at group level. Reference points for the linear measurements were: the coronal margin of the implant collar and the most coronal point of bone-to-implant contact.
Time (minutes)	The time in minutes of the surgical procedure, from the incision of the gingiva to the placement of the last stitch	Time needs to perform the procedure, starting from the surgical incision to the delivery of the last suture, including the additional implants.

Trial Locations

Locations (1)

Aldent University; 🇦🇱 Tirana, Albania