Analyzing Stump-socket Interface Pressure to Improve Gait in Above-knee Amputee
- Conditions
- Lower Limb Amputation Above Knee (Injury)
- Interventions
- Device: Clinical and instrumented measurements
- Registration Number
- NCT01848964
- Lead Sponsor
- University Hospital, Grenoble
- Brief Summary
This study aims at evaluating the relation between quality of the interface between the stump and the prosthesis, and the quality of gait in above-knee amputees.
The hypothesis is that an adapted prosthesis allowing an efficient gait in above-knee amputees corresponds to an homogeneous pressure distribution pattern onto the stump.
- Detailed Description
Forty amputee patients will be evaluated for satisfaction with the prosthesis, pressure repartition pattern and functional capabilities.
Pressure at the stump-socket interface will be recorded using a set of 14 single cells sensors placed in predefined positions onto the stump. Pattern of pressure will be measured in four tasks: sitting posture, standing posture, gait initiation, and gait at preferred velocity.
Reproducibility of the pressure repartition pattern will be analyzed by repeating gait and standing posture task in the first 15 patients included.
In patients whom prosthesis has been modified on the basis on the first pressure measurement (pressure peak and bad functional capacities), a new pressure measurement will be repeated 2-8 weeks apart.
Postural and gait abilities will be also assessed in 40 age/gender matched non-amputated subjects to serve as control data.
Recruitment & Eligibility
- Status
- COMPLETED
- Sex
- All
- Target Recruitment
- 80
- unilateral transfemoral amputation
- use of a prosthesis with a "contact" socket
- neurological or muscular disorder likely to impair walking capabilities
- Mini Mental State Examination below 24/30
- Healthy subjects :
Exclusion Criteria:
- neurological or muscular disorder likely to impair walking capabilities
- Mini Mental State Examination below 24/30
Study & Design
- Study Type
- INTERVENTIONAL
- Study Design
- SINGLE_GROUP
- Arm && Interventions
Group Intervention Description Evaluation Clinical and instrumented measurements First, the assessment will be performed to evaluate the relationship between pressure repartition pattern, clinical evaluation and motor capabilities. All the patients and volunteers will be concerned by this first part. A second part will be conducted in 15 amputees within the 40 patients. Assessments of pressure pattern during gait and standing will be repeated two times: by the same investigator and by a different investigator, in order to test intra- and inter-evaluator reproducibility. After the first assessment, the prosthesis may be modified in order to solve clinical problems. In that case, a new assessment will be proposed 2 to 8 weeks after in order to test the effect of the prosthesis modification on pressure pattern, gait, posture and clinical parameters.
- Primary Outcome Measures
Name Time Method Two minute Walking Test At inclusion (baseline) for all patients Maximal distance(m)walked during 2 minutes (one trial)
- Secondary Outcome Measures
Name Time Method Variation coefficient of maximal pressures during gait At inclusion (Baseline) for all patients Calculated on the basis of 10 walking trials of 10 meters. The maximal pressure will be measured at each step for each sensor. The mean maximal pressure is calculated for each of the 14 sensors. The variation coefficient is calculated between these 14 values (variation coefficient = standard deviation/mean)
A low variation coefficient of pressure is supposed to represent an homogeneous repartition of the pressure in the prosthesis.Gait spatial and temporal parameters At inclusion for all patients Calculated based on 10 walking trial of 10 meters. Speed, step length of the prosthetic and non-amputated leg and standing time on the prosthetic and non-amputated leg
Change in two minutes walk tests between Baseline and 5 Weeks Five weeks (W5) in average after inclusion in patients in whom the prosthesis will be modified If a modification of the prosthesis is required and performed on the basis of the first assessment (at inclusion), a new assessment with the modified prosthesis is performed 5 weeks later (from 2 to 8 weeks).
Change in walking capabilities is assessed by calculating the difference between results of the two minute walk test at inclusion and at 5 weeks.Change in the variation coefficients of maximal pressures between Baseline and 5 Weeks 5 Weeks in average (2 and 8 weeks) after the inclusion in patients in whom the prosthesis will be modified If a modification of the prosthesis is required and performed on the basis of the first assessment (at inclusion), a new assessment with the modified prosthesis is performed 5 weeks later (from 2 to 8 weeks).
Change of repartition pattern will be assessed by calculating the difference between the variation coefficient before and after the prosthesis modification.Variation coefficient of maximal pressure during standing posture At inclusion for all patients Calculated based on 4 standing trial of 30 seconds. The calculation is the same as for gait, but the mean pressure during the postural trial will be used instead of the maximal pressure during the step.
Reproducibility of the Variation Coefficients of maximal pressures At baseline At inclusion (baseline), the measurements of pressure repartition pattern in gait and standing posture tasks will be repeated twice, in order to test inter- and intra-evaluator reproducibility.
Trial Locations
- Locations (1)
University Hospital
🇫🇷Grenoble, France